Cruise control take a few sec to get on??normal or not?
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Cruise control take a few sec to get on??normal or not?
When I press the button to set the cruise on. it take like a second or two to come on so my speed drop like 5 or 10 KM/H and when it does get on my speed raise back to where I did hit the button..
is that normal on these car? if not what could be causing this?
is that normal on these car? if not what could be causing this?
Last edited by pattheriault on August 6th, 2009, 1:26 pm, edited 1 time in total.
Re: Cruise control question
well my cruise does the samething But i thought it was cause of iy being an older car that it takes a sec to catch it
92 mx-3 gs,klde,spec stage II+ clutch,awr 88mounts, remaned axles,CAI,seven nipple ditsy, new alpine speakers,panasonic 7'' dvd deck ,10'' kicker l5, hei mod, removed air box. 17 sortmaxs 10 spoke white nexan n700 tires
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: Cruise control question?
Im really not sure if it's normal or not that's why id like a few people opinion on it..
-
- Junior Member
- Posts: 29
- Joined: July 6th, 2009, 3:56 pm
- antispam: No
Re: Cruise control take a few sec to get on??normal or not?
mine does the same thing, and if i remember right, i looked it up in the owners manual and it says it should take 2-3 seconds to engage, like 2-3 seconds of holding the set button
Re: Cruise control take a few sec to get on??normal or not?
idk if mine dose or not. i pulled it out lol
93 mx-3 with a klde swap. still working on
94 cobra svt. mostly stock.
08 ninja. 1 wheel fun. lol
94 cobra svt. mostly stock.
08 ninja. 1 wheel fun. lol
Re: Cruise control take a few sec to get on??normal or not?
The cruise is vacuum run so it's normal. If it were electronic then the response would be a bit quicker. The cruise system takes time to create that cable tension using vacuum pressure.pattheriault wrote:When I press the button to set the cruise on. it take like a second or two to come on so my speed drop like 5 or 10 KM/H and when it does get on my speed raise back to where I did hit the button..
is that normal on these car? if not what could be causing this?
I pulled my system out as well.... more room in the bay so it doesn't look so cluttered.
'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false;
viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false;
viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
Re: Cruise control take a few sec to get on??normal or not?
it saves me speeden tickets ha ha on the highway
92 mx-3 gs,klde,spec stage II+ clutch,awr 88mounts, remaned axles,CAI,seven nipple ditsy, new alpine speakers,panasonic 7'' dvd deck ,10'' kicker l5, hei mod, removed air box. 17 sortmaxs 10 spoke white nexan n700 tires
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
Re: Cruise control take a few sec to get on??normal or not?
then sell it to me please, i have allways wanted a CC in my carninja_man wrote:idk if mine dose or not. i pulled it out lol
K8 :: 136.8 bhp---160 nm---108.0 whp---118lbs/torque
ET: 15.567 @ 136 kmh (84 mph)
"Racing a Honda is like being in the special Olympics, you may win, but in the end your still retarded."
ET: 15.567 @ 136 kmh (84 mph)
"Racing a Honda is like being in the special Olympics, you may win, but in the end your still retarded."
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Cruise control take a few sec to get on??normal or not?
I replied, but my post got deleted because I pushed the "No racing stories" boundary.
I learned my lesson.
Anyway, I like that there's a little lag, because when it kicks in (in my fast car), it puts my head back
I learned my lesson.
Anyway, I like that there's a little lag, because when it kicks in (in my fast car), it puts my head back
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Cruise control take a few sec to get on??normal or not?
yeah mine takes a second or so to engage but it doesn't seem like 2-3 seconds? anyways it's cool having a ze with a 626 tranny and CC - hwy mileage FTW
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: Cruise control take a few sec to get on??normal or not?
I just rebuilt my CC module, and I noticed that after conditioning and cleaning the rubber inside, it still takes a second to engage, but it is less noticeable then before. If you're is taking 3 seconds to engage, check wires, clean the pinouts by the module or rebuild the module, its free unless something is broken, just needs cleaning inside!
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: Cruise control take a few sec to get on??normal or not?
I think you may be talking about the actuator, not the module. The module is in the passenger side kick-panel, and the actuator is in the engine bay.
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: Cruise control take a few sec to get on??normal or not?
where is the actuator exectly??
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: Cruise control take a few sec to get on??normal or not?
Ok, I thought it was all one piece. Yes, it was in the passnger side of the engine bay right above the windshield washer bottle.
Re: Cruise control take a few sec to get on??normal or not?
im afraid of cruise control
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D