94 mx3 klze swap

[lost4good2009]

ok so i have been doing some research for my situation here and im just confused, i have a 94 mx3, so i know theres a problem with the coolant temp sensors right? im trying to figure out what ecu to run, i was lookin to not have to chip anything, but that might not be feasable, i was wanting to pull a kl01 or kl07 ecu and kl02 vaf, but im still confused on the temp sensor things... so any input or suggestions would be great

[solo_ryder]

You can get ur k834 chipped if you want, you can also run any other ecu you want. The only issue is gonna be the temp sensor. Howerver there is a easy fix, you just wire the extra sensor into your ecu or you get a kl48 ecu from a 94 probe and that will recognize the 1 coolant temp sensor, even if chipped.

If you are not chipping any kl ecus then you wanna run a kl02 vaf, if you are chipping and u have a straight neck u wanna run the je50. I currently am running a kl48 chipped for a straight neck motor and. Kl02 vaf

[lost4good2009]

alright, i think i understand, my setup is a straight neck motor, millenia intake and tb, and stock ecu, but i dont have anything swapped yet, motor is still in my driveway

[solo_ryder]

Yea, same swap as I have. Just get your current ecu chipped.

Send the numbers on the stock chip to ryan at probegtze @ hotmail.com

He will verify you can chip the k834, only a handfull can be chipped IIRC.

[lost4good2009]

dang... so if i cant get mine chipped... then what do i do?

[Mad Cow]

You can run a '94 probe or mx6 ECU and KL02 VAF, it won't be perfect but it'll work well.

[solo_ryder]

dang... so if i cant get mine chipped... then what do i do?

Then get a k801 ecu chipped. It dont matter

[lost4good2009]

alright thanks alot man, i got another question, the only thing stoppin me from my swap is the axles, i got the nut off one side but couldnt get the other, and then i tried to get the one out of the trans but i couldnt, i pryed and pryed, isnt there a seal or something i have to break? cuz thats the only thing holding back the swap, i can run my stock ecu and tb for now.

[Mad Cow]

Check out the online manual, it'll tell you everything you need to know.

[lost4good2009]

alrighty thank you