The EGR on the curved neck ZE manifold is quite different than our MX3/Probe EGRs.
The connector that connects to it, wont fit on it.
The curved neck EGR has 3 connectors in it just like our MX3/Probe connectors.
I am thinking of braking off the plastic thing on the Curved neck EGR and just soldering in the wires.
Im just wondering, are the connectors the same as the Probe/MX3 EGR?
Do the same 3 connectors that connect to the Probe EGR, work in the same order on the curved neck egr?
Like, for instance, if the left connector is the color green, middle is black and the one in the right is white, on the Probe EGR, will it be in the same order on the curved neck EGR?
thanx
btw, I want the EGR working
Curved neck manifold, I need help with hooking up the EGR
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
Curved neck manifold, I need help with hooking up the EGR
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
Re: Curved neck manifold, I need help with hooking up the EGR
If you want to keep working EGR. I just swapped every thing over from the K8. You will need to find different places to mount the brackets to the manifold. But it can all be swapped over.