[WTB] Crank Pulley 1.8 v6

tmac4t4 · Post by **tmac4t4** » May 14th, 2009, 7:43 pm

aftermarket or stock, PM me if you have one.
mines split in half somehow and im not sure how its even on the car and working still

Mad Cow · Post by **Mad Cow** » May 14th, 2009, 8:07 pm

I have one in my garage, $30.

Swaid · Post by **Swaid** » May 27th, 2009, 10:12 pm

mines just split tooo...are the underdrive pulleys direct replacement? I read that you have to modify the oil pan...

marcdh · Post by **marcdh** » May 28th, 2009, 5:33 am

UDPs require dremeling away some metal around the oil pump shroud and the timing belt cover.

Here's how:
http://uk-mx3.com/forum/viewtopic.php?t=1128

You will also need new belts.

muttpower · Post by **muttpower** » May 28th, 2009, 6:14 am

Personally, I'd just go with an UnderDrive Pulley. They're not too hard to install but worth it.

ramsen25 · Post by **ramsen25** » May 30th, 2009, 3:07 pm

I have a brand new under drive pulley with the belts for the 2.5 if you need

mazda___mx3 · Post by **mazda___mx3** » May 31st, 2009, 8:12 pm

ive got a couple crank pullies laying around i have 2 parts cars that are semi complete if you need one or anyother parts

tmac4t4 · Post by **tmac4t4** » June 7th, 2009, 9:50 pm

purchased a lightweight one for 50 bucks,,thanks for the replies.

MX-3.com

[WTB] Crank Pulley 1.8 v6

[WTB] Crank Pulley 1.8 v6

Re: [WTB] Crank Pulley 1.8 v6

Re: [WTB] Crank Pulley 1.8 v6

Re: [WTB] Crank Pulley 1.8 v6

Re: [WTB] Crank Pulley 1.8 v6

Re: [WTB] Crank Pulley 1.8 v6

Re: [WTB] Crank Pulley 1.8 v6

Re: [WTB] Crank Pulley 1.8 v6