+45 offset

shadowmx3 · Post by **shadowmx3** » April 12th, 2009, 5:20 pm

Hello! would 16 X 7 with +45 offset fit the mx3 or any one have this size set up also with some pic be nice?
Thank you!

solo_ryder · Post by **solo_ryder** » April 12th, 2009, 5:26 pm

Yes, that will fit easy

45+ is a nominal offset, same as the stock rims.

A 16x8 45 offset would also fit

shadowmx3 · Post by **shadowmx3** » April 12th, 2009, 5:49 pm

Thanks solo_ryder. now the hard part is to find these dam RH cp035 rims, lol

_-Night-Shade-_ · Post by **_-Night-Shade-_** » April 12th, 2009, 7:00 pm

16x7 with 40 offset works too (what I have)

solo_ryder · Post by **solo_ryder** » April 12th, 2009, 7:29 pm

Yea, that is what I am gonna get too, I would really like 16x8 38 offset but its so hard to find 16x8 rims for a good price.

_-Night-Shade-_ · Post by **_-Night-Shade-_** » April 13th, 2009, 1:31 am

Whoops, that was a typo. Meant to say 17x7

hppwdn · Post by **hppwdn** » April 13th, 2009, 9:15 am

With the higher offset rims just make sure you factor in tire size too. If you run a wide rim with a high offset wider tires will rub your strut. If you stay within stockish tire sizes you should be fine.

shadowmx3 · Post by **shadowmx3** » April 13th, 2009, 2:50 pm

Cool! what if ya drop the car with H&R spring would it still clear the strut?

Post by **Mooneggs** » April 13th, 2009, 2:57 pm

shadowmx3 wrote:Cool! what if ya drop the car with H&R spring would it still clear the strut?

the only way lowering will affect it if it clears the strut is if you have really negative camber since the strut does not move... lowering may also affect if it clears the fender or not...

shadowmx3 · Post by **shadowmx3** » April 17th, 2009, 4:29 am

Hmmm would the +35 offset one make the rim stick out the fender line? I dont want it to look like a dam lowrider n dont want to buy another set of rim to try to sell it off like the 17X7 drag dr2 rim i got. I like how it +40 offset sit like in the middle thou, but too dam heavy.
Thank you for replies everyone.

solo_ryder · Post by **solo_ryder** » April 17th, 2009, 1:15 pm

16x7 +35 offset would fit nice, should be fairly flush with the fender

shadowmx3 · Post by **shadowmx3** » April 17th, 2009, 3:21 pm

Sweet thanks again everyone for help, i might just go for a set of enkie rpf1 instead dammit cant find no cp-035.

shadowmx3 · Post by **shadowmx3** » April 21st, 2009, 11:42 pm

man cant believe i got me a set of RH cp-035

16X7 with +35 offset sit really nice. Thanks too the people that replies. Wonder if i drop it with H&R spring would clear the fender?

solo_ryder · Post by **solo_ryder** » April 22nd, 2009, 12:33 am

It should.

Pics!

shadowmx3 · Post by **shadowmx3** » April 25th, 2009, 7:17 am

man can find a digital cam, ill get pics up when i can. How do i post pics anyway?

MX-3.com

+45 offset

+45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset

Re: +45 offset