Probe Engine Into An Mx-3?
Probe Engine Into An Mx-3?
Is it possible to fit a Ford Probe GT motor into a 1993 V6 Mazda MX-3? I have heard it is one of the easiest swaps but I wasnt sure.
- tehbrookzorz
- Regular Member
- Posts: 1561
- Joined: April 29th, 2006, 6:59 pm
- Location: Calgary, Alberta
- tehbrookzorz
- Regular Member
- Posts: 1561
- Joined: April 29th, 2006, 6:59 pm
- Location: Calgary, Alberta
Re: Probe Engine Into An Mx-3?
http://en.wikipedia.org/wiki/Mazda_K_engine" onclick="window.open(this.href);return false;
(In short, yes.)
(In short, yes.)
Cody
![Image](http://i.imgur.com/Q0Vh17N.jpg)
![Image](http://i.imgur.com/Q0Vh17N.jpg)
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Probe Engine Into An Mx-3?
Dude...
All K series engines are mechanically interchangeable. All trannies mated to v6 engines are also interchangeable because of that fact.
Same goes for B series and their trannies.
All K series engines are mechanically interchangeable. All trannies mated to v6 engines are also interchangeable because of that fact.
Same goes for B series and their trannies.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Re: Probe Engine Into An Mx-3?
Thanks for the fast reply! So its that simple to upgrade from a 1.8 to a 2.5?
If I switch my motor do I have to switch my tranny too, even if its a 5 speed?
If I switch my motor do I have to switch my tranny too, even if its a 5 speed?
Re: Probe Engine Into An Mx-3?
Gotcha..thanks!
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Probe Engine Into An Mx-3?
No, keep your tranny... unless you want to change it. Gosh man, just peek at the v6 FAQ section. Hundreds of v6 swaps have taken place.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: Probe Engine Into An Mx-3?
There are gobs of swap information on this site, plenty of it in the FAQ. Swapping a 165/170hp KLDE is the same as the 198hp KLZE, which is literally the exact same as a K8, it fits like stock, just need to play around a bit with the vacuum lines if using the KL in intake manifold, but that's really a non-issue.
The only difference with putting a KL is that you'll need a better clutch to handle the torque (search on that) and a proper ECU and/or VAF combo (search) so the motor runs the best and efficient. Also while the motor is out, there's a whole wack of preventative maintenance things that should be done (search) to keep your car reliable.
The only difference with putting a KL is that you'll need a better clutch to handle the torque (search on that) and a proper ECU and/or VAF combo (search) so the motor runs the best and efficient. Also while the motor is out, there's a whole wack of preventative maintenance things that should be done (search) to keep your car reliable.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Re: Probe Engine Into An Mx-3?
Yeah if you think you can swap another 1.8L engine in, there's no reason you can't put a 2.5L engine in.
1995 Eunos 30x KLZE
Worklog
Worklog
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: Probe Engine Into An Mx-3?
BASICALLY i would start lookin at peoples worklogs and once you find someone whos done it properly, copy them.
NEED PARTS INSTALLED? PM ME!
![Image](http://i453.photobucket.com/albums/qq253/projectzemx3/avator2.jpg)
![Image](http://i453.photobucket.com/albums/qq253/projectzemx3/avator2.jpg)
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: Probe Engine Into An Mx-3?
ahahahahaha
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Crying :crying:](./images/smilies/crying.gif)
![Confused2 :confused2:](./images/smilies/confused2.gif)
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)