new hood
-
- Regular Member
- Posts: 576
- Joined: March 24th, 2002, 2:01 am
- Location: Stellarton, Nova scotia, Canada
- Contact:
new hood
I know not everyone reads the worklogs, so I am going to post this in here too.
Well, I finally decided on a hood and a place to get one. I wanted to get a invader style or inverted style hood so I could get rid of some of the heat in the engine compartment, but I didn't want to get a carbon fiber hood. I am not into the black hood on a red car thing so I am wanting to paint the hood and for that fact I thought getting a CF hood would be a waste of money for me.
I talked to Oscar from Pakfeifer Canada, also know on here as EZ_4_FUN, and he let me know that he could get one made up in 5 working days and shipped to me as soon as it was done. Well, then was the big question, can I get it in fiberglass instead of CF and to my surprise he said it would be no problem because the same mold can be used for either product. After talking to him about the shipped price, I took a couple weeks to think about it and talk it over with the wife.
I finally gave Oscar the okay and waited for my hood. After 5 days, he told me that is was finished and would be shipped out as soon as he could get it out. It was a Friday when it was ordered, so it wasn't started to be made until Monday. The following Monday, he told me it was ready and a couple days later he got me the tracking number and it arrived at my place the Monday that just passed. So it took 2 weeks total, to have it made and shipped to me.
Overall, I am very pleased with the whole transaction and will definetly be doing more business with him, I am thinking of getting a MS bumper from him next. Also, the hood is very nicely built and the fitment is really good. I really like how the hood has the under skeleton like the factory hood does and there is a spot for the hood prop and the hinges line up with the hood too.
I would just like to thank Oscar for everything and you will be hearing from me.
On with the pics:
Well, I finally decided on a hood and a place to get one. I wanted to get a invader style or inverted style hood so I could get rid of some of the heat in the engine compartment, but I didn't want to get a carbon fiber hood. I am not into the black hood on a red car thing so I am wanting to paint the hood and for that fact I thought getting a CF hood would be a waste of money for me.
I talked to Oscar from Pakfeifer Canada, also know on here as EZ_4_FUN, and he let me know that he could get one made up in 5 working days and shipped to me as soon as it was done. Well, then was the big question, can I get it in fiberglass instead of CF and to my surprise he said it would be no problem because the same mold can be used for either product. After talking to him about the shipped price, I took a couple weeks to think about it and talk it over with the wife.
I finally gave Oscar the okay and waited for my hood. After 5 days, he told me that is was finished and would be shipped out as soon as he could get it out. It was a Friday when it was ordered, so it wasn't started to be made until Monday. The following Monday, he told me it was ready and a couple days later he got me the tracking number and it arrived at my place the Monday that just passed. So it took 2 weeks total, to have it made and shipped to me.
Overall, I am very pleased with the whole transaction and will definetly be doing more business with him, I am thinking of getting a MS bumper from him next. Also, the hood is very nicely built and the fitment is really good. I really like how the hood has the under skeleton like the factory hood does and there is a spot for the hood prop and the hinges line up with the hood too.
I would just like to thank Oscar for everything and you will be hearing from me.
On with the pics:
Re: new hood
I'm happy to hear that you had no setbacks!
two thumbs up for me!!
Enjoy!!
Now, who's interested in a Carbon Fiber Hatch ????
http://www.mx-3.com/phpBB3/viewtopic.ph ... 0&start=15" onclick="window.open(this.href);return false;
two thumbs up for me!!
Enjoy!!
Now, who's interested in a Carbon Fiber Hatch ????
http://www.mx-3.com/phpBB3/viewtopic.ph ... 0&start=15" onclick="window.open(this.href);return false;
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
Re: new hood
You can paint CF t match the body colour! But all I see are X's!mx3optidrive wrote: I am not into the black hood on a red car thing so I am wanting to paint the hood and for that fact I thought getting a CF hood would be a waste of money for me.
Re: new hood
Yes, you can paint CF, but like he said its a waste of money if in the end the CF is covered; no point.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: new hood
I guess everybody forgot about the weight difference?EZ_4_FUN wrote:Yes, you can paint CF, but like he said its a waste of money if in the end the CF is covered; no point.
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
-
- Regular Member
- Posts: 576
- Joined: March 24th, 2002, 2:01 am
- Location: Stellarton, Nova scotia, Canada
- Contact:
Re: new hood
Mooneggs wrote:I guess everybody forgot about the weight difference?EZ_4_FUN wrote:Yes, you can paint CF, but like he said its a waste of money if in the end the CF is covered; no point.
How much of a weight difference can there really be between fiberglass and CF? I can't see it being more than a couple ounces if that.
Re: new hood
The weight difference between CF and FG is nil.
I think mooneggs was referring to the difference between a composite hood Vs the factory steel one.
I think mooneggs was referring to the difference between a composite hood Vs the factory steel one.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: new hood
indeedEZ_4_FUN wrote:The weight difference between CF and FG is nil.
I think mooneggs was referring to the difference between a composite hood Vs the factory steel one.
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
Re: new hood
I like the look of that hood. Looks sweet
-
- Regular Member
- Posts: 576
- Joined: March 24th, 2002, 2:01 am
- Location: Stellarton, Nova scotia, Canada
- Contact:
Re: new hood
Thanks, I really like it.coltfoet5 wrote:I like the look of that hood. Looks sweet
Sorry I thought you were saying there was a difference in weight between the CF and Fiberglass. But, hell yeah, there is a big difference between the stock, which I sold about 4 years ago, and this one.Mooneggs wrote:indeedEZ_4_FUN wrote:The weight difference between CF and FG is nil.
I think mooneggs was referring to the difference between a composite hood Vs the factory steel one.