Problem disembling my calipers

[Brainless]

OK I'm having some problems with my brakes and I need to disemble them (to see if I can find the problem). But the two 14mm bolts are reeeaallly hard to take off.<P>Any advice??<P>thanx

[white fish]

two words AIR TOOLS

[VizualXTC]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Brainless:<BR><STRONG>OK I'm having some problems with my brakes and I need to disemble them (to see if I can find the problem). But the two 14mm bolts are reeeaallly hard to take off.<P>Any advice??<P>thanx </STRONG><HR></BLOCKQUOTE><P>Maybe soak them in WD-40 if you havn't already.

[5spd_GS]

I just did my brakes (4 wheel disks) last weekend.. and i had sort of the same troubles. It took me like 3 hours to do the brakes when it should have only taken like 1. I did them myself , the only trouble i found was that the bottom "sliders" on each caliper were seized. I didnt have trouble with the bolts though.. remember lefty loosey righty tighty <BR>WD40 might work, but you would want to clean off the bolts completely before you put them back in<BR>lemme know how it goes

[white fish]

yeah those sliders are a pain I took mine out twice already to clean them but the back ones are so far gone I'm going to buy new ones [Sliders are a Pain]