It's not just a 12pt 12mm , it's a 12 pt STAR head socket you need. You'll need to go to a hard core tool store like Sears/Craftsman to find it.
Then, if you ever have to take the crank girdle off the bottom end, you'll need a 10mm STAR socket. FYI
how do i remove the HLA's
- ccreech
- Regular Member
- Posts: 477
- Joined: July 14th, 2004, 2:01 am
- Location: Lawrenceville, Ga
- Contact:
12 point 12 mm socket. Not a star or torques socket.
Search for "Head Bolt size" using all words and find this 9 posts down:
http://www.mx-3.com/phpbb2/viewtopic.ph ... 09&start=0
Search for "Head Bolt size" using all words and find this 9 posts down:
http://www.mx-3.com/phpbb2/viewtopic.ph ... 09&start=0