PROBE GT MTX in '95 MX3 GS PRECIDIA

b3atbxr · Post by **b3atbxr** » April 11th, 2007, 7:17 pm

what is the axle situation in swaping a probe gt 5spd trans into an ATX MX3 GS? i realize the probe axles are bigger in size so my question lies w/ the input side of the axle into the trans on both sides.. my assumption is that i will need a hybrid axle w/ the probe inner cv(to trans) and mx3 outer(hubs)?

atlantamx3 · Post by **atlantamx3** » April 11th, 2007, 7:55 pm

use mx-3 mtx axles.

b3atbxr · Post by **b3atbxr** » April 11th, 2007, 8:21 pm

so the spline count and size of the mx3 mtx axle will fit in the probe gt mtx? cuz the atx axle wasnt nearly big enough when i tried it..

Tunes67 · Post by **Tunes67** » April 11th, 2007, 8:29 pm

The ATX axles are different than the MTX axles.. the MTX ones should work just fine.

Tunes67

2RotorsNaDream · Post by **2RotorsNaDream** » April 12th, 2007, 1:16 pm

Just use the MTX MX-3 axles. The Probe GT tranny is the same exact tranny as the MX-3 V6 tranny.

b3atbxr · Post by **b3atbxr** » April 30th, 2007, 5:03 pm

does the year make a difference?

b3atbxr · Post by **b3atbxr** » April 30th, 2007, 5:03 pm

its a 95 car w/ 92 probe gt tranny

mx3autozam · Post by **mx3autozam** » May 1st, 2007, 1:21 am

if its a 92 probe then the tranny won't fit because thats a 1st gen probe and there totally different

b3atbxr · Post by **b3atbxr** » May 1st, 2007, 3:15 am

its the 2nd gen body maybe i misspoke it is a 93 gt w/ v6