[FS] 92 gs parting out
-
- Regular Member
- Posts: 316
- Joined: May 27th, 2002, 2:01 am
- Location: Cape Carteret, North Carolina
- Contact:
[FS] 92 gs parting out
Ive got a 92 gs 5-speed "green" i am parting out runs and drives and the body is in good shape. If you need any parts, post what you need and make me an offer. The only thing i do not have anymore is the distributor Thanks!!
Last edited by white94mx3 on April 8th, 2007, 9:44 am, edited 1 time in total.
1994 Mazda MX-3 RS (Project RS-T)
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
HEY i would LOVE to get the passenger side HUB. Also why not the drivers side. Could also use the REAR BRAKE spring thingy (the metal pieces from the brake pads) Rear disks are they in good condition? I would want those.
The most important is the passenger side wheel hub.. mine is starting to make that droning sound.
EDIT, i believe its called the SPINDLE?
The most important is the passenger side wheel hub.. mine is starting to make that droning sound.
EDIT, i believe its called the SPINDLE?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
your hub is what youe wheel bolts to...your spindle is what your hub slides into and connects to your sway bar and shock tower...also the ball joint is on the bottom of the spindle...if you hear a humming noise its probly your wheel bearing...i just did my pas. side wheel bearing and it really wasnt all that bad... just have to take it to a shop have them press it out...press the new one in and press the hub in after you get the new wheel bearing in... they are about $43 US
1992 mx-3, white, 1.6 sohc, 5 speed, custom: intake, interior and exhaust
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
the thing is that my spindles are so old.. and most like like like the driver side, i had to use a junk yard one because the machine shop told me it was no good anymore, it had overheated.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Regular Member
- Posts: 231
- Joined: August 6th, 2006, 3:52 pm
- Location: Brantford, Ontario, Canada
GS lip? if so im interestedm shipping to brantford ontario n3r7e8 thanks
95 RS Blaze Red, RTX 17's Gunmetal with Polished Lip, Falken Tires, GS Lip, Carbon Fibre Altezza Tailights, Black and Red Interior (front/rear seats, door panels, and rear panels. GS Spoiler, Hood with scoop, Black Mirrors, Pioneer Deh-p6800 Deck, Infinity 6010cs components, infintity 4x6 Rears, Red Shift Boot , 12 Blue Interior Lights throughout car and 4 leds in vents wired to 2 switches total
Feedback
http://www.mx-3.com/phpbb2/viewtopic.php?t=54606
http://www.cardomain.com/ride/2394622
Feedback
http://www.mx-3.com/phpbb2/viewtopic.php?t=54606
http://www.cardomain.com/ride/2394622
-
- Regular Member
- Posts: 1088
- Joined: April 8th, 2006, 9:21 am
- Contact:
i need a 1.6 sohc valve cover if you have it..please let me know through my myspace page. http://www.myspace.com/swflatunerz
-
- Regular Member
- Posts: 316
- Joined: May 27th, 2002, 2:01 am
- Location: Cape Carteret, North Carolina
- Contact:
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
I need the spinde, my bad. Ill have it checked over this week and let ya know which one. Now im confused because it may be the rear. oh yeah, got the rear rotors?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Regular Member
- Posts: 316
- Joined: May 27th, 2002, 2:01 am
- Location: Cape Carteret, North Carolina
- Contact:
-
- Regular Member
- Posts: 61
- Joined: December 22nd, 2005, 1:45 pm
- Location: Morgantown, Wv
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Hey its confirmed , the bearing is going bye bye and the spindle is not good anymore. I do need the spindle. How much to 79927? i think it will hold a bit more than a week lol
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Regular Member
- Posts: 1088
- Joined: April 8th, 2006, 9:21 am
- Contact: