Ignition Switch

This forum is for discussion of topics relating to MX-3 lighting such as Headlights, Tail lights, Accessory Lights, Interior Lights, Etc. For example, Rear Euro Altezza Style Tail lights, Headlight units, LED's, HID's, Bulbs, Interior lights, Neons, Strobes, Auxillary Lights/Fogs or anything filament and gas discharge related.
Also anything dealing with the elctrical system.
Post Reply
Babymx3
Regular Member
Posts: 35
Joined: October 23rd, 2006, 12:51 pm
Location: Toledo

Ignition Switch

Post by Babymx3 »

I have a key that is stuck in the ignition.
And I cant get it out...and I dont think a locksmitch can either since my cousin tried the crazy glue trick and well lets justr be thankful I can still start the car.
But, the question is, is it possible to switch the ignition part where the key goes in with another mazda (Mazda 3) My friend bought a wrecked one for the engine.
Will I be able to match up the wires from My MX to the wires on the 3 switch?
Top
User avatar
PATDIESEL
Senior Member
Posts: 4476
Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.

Post by PATDIESEL »

It probably will not fit even if it does wire up. You can pop the key out from the back side of the tumbler if you remove the lock from the coloumn. (as long as it is not super glued in)
Image
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
Top
Post Reply

Return to “Electrical & Lighting”