[FS] 93 gs project car with K8 and KLZE

FlyingMXer · Post by **FlyingMXer** » February 28th, 2007, 11:05 am

I have a 93 GS, which began as a project car and ended up running out of time. parts available include:

original K8 with auto tranny (engine runs good, tranny shifts hard)
JDM KLZE with auto tranny (never been installed)
ZE ECU out of 95 millenia
ZE TCU out of same
complete dash and engine wiring harnesses with diagrams from millenia
curved neck intake off of millenia is on ZE
also have original straight neck intake
and of course the car itself (black ext and int)

I would prefer to sell as a package if possible
parts are located in murfreesboro TN, zip 37130
$1500 takes the whole bundle

ScooterBovine · Post by **ScooterBovine** » February 28th, 2007, 1:20 pm

Hmmm, how far are you from Nashville? My mom lives down there, and I need an excuse to visit her... Is the vehicle drivable, or in pieces like it would appear? Any pics?

monty73741 · Post by **monty73741** » February 28th, 2007, 1:23 pm

fix the topic please or it will be deleted

FlyingMXer · Post by **FlyingMXer** » February 28th, 2007, 4:04 pm

M'Boro is approx 30-40 min SE of nashvegas depending on where you are at in nashville. The car is currently disassembled. The K8 is out and the ZE is yet to be put in. However, it is tow/pullable, all the wheels are on it.

well cant get pics to come up but you can copy and paste

ScooterBovine · Post by **ScooterBovine** » February 28th, 2007, 10:38 pm

So if I got it towed, how do I get both engines to where I want?

I doubt they fit in the trunk, haha!

1992blazeredgs · Post by **1992blazeredgs** » February 28th, 2007, 11:35 pm

The hatch could easily hold one of the two motors. I drove home some 3 hours away with a blown klde in my hatch last winter. Put one there, and the other in the car that is towing the mx3 home.

Nate

FlyingMXer · Post by **FlyingMXer** » March 1st, 2007, 1:58 pm

Or you could put one in the truck bed and the other in the engine bay. I could probably get the K8 set back in the mounts temporarily. I appologize that i dont have pictures of the car in its current state. However, the hatch is pretty full of parts (headlights, radiator, etc) from the front end.

Steeb · Post by **Steeb** » March 1st, 2007, 2:16 pm

95 millenia did not have the ze ecu.

ScooterBovine · Post by **ScooterBovine** » March 1st, 2007, 10:30 pm

Grrrr, if I wasn't on deployment, I would be all over this like a fat kid on a cupcake! I would buy it, but I'm not sure how the heck I will get it to where I need it to go. I need to call my mother and see if she has any room to park it at her place. I'll get back to you, but this might involve an expensive tow bill... For me anyways, ha!

FlyingMXer · Post by **FlyingMXer** » March 2nd, 2007, 11:31 am

ok, just keep me posted. The ECU came out of a 95 millenia 2500. Where you deployed to? I know a guy getting ready to head off for a 365 TDY to Ghannytown.

hgallegos915 · Post by **hgallegos915** » March 3rd, 2007, 8:28 pm

How much for the engine? Im interested (reasons are yet to be unvealed)

kl31 cammed or kl01?

Nd4SpdSe · Post by **Nd4SpdSe** » March 3rd, 2007, 8:32 pm

Steeb wrote:95 millenia did not have the ze ecu.

I believe you are right. If i remember right, Millenia's only came OBDII as well, so even if you pulled the ECU, it would be pretty much useless

FlyingMXer · Post by **FlyingMXer** » March 6th, 2007, 4:37 pm

I am not sure of which cams are in it as I have not looked. If I had to piece it up I guess $1000 for the ZE with wiring harnesses, manifold and ECU if desired.

If you are located near the middle Tennessee area we might be able to work out something towing wise. Scooter if you want to give me an addy/general area for your mom's house I could work on getting a cheaper tow, as I know some people in M'Boro that do it.

MX-3.com

[FS] 93 gs project car with K8 and KLZE

[FS] 93 gs project car with K8 and KLZE

Re: 93 gs project car gone wrong