OBO II wiring for DE

ProspectMx3 · Post by **ProspectMx3** » November 12th, 2006, 3:32 pm

I have a late model 95 MX-3 that is OBO II and I need to find info on the wiring, for installation of a DE. I've tried the search function but it is useless.

Tunes67 · Post by **Tunes67** » November 12th, 2006, 4:14 pm

While I dont agree that the search function is useless.. there probably isnt a whole lot of OBDII swap information to find. I think if I was in your shoes and wanted to swap in a DE to your MX-3.. I would look for a 96 (maybe 95 if your lucky) or later... 626, probe gt, millenia or MX-6. Get a complete donor car that is also OBDII. That way you will have all the wiring, ECU and engine sensors that you would need.

Tunes67

max kl · Post by **max kl** » November 13th, 2006, 1:33 am

a kl swap on a 95 n up isthe same excerp yoy must use all k8 parts like dis crank sensor o2 sensors cats ect tps ........

if not you will have a perpeual cel.

the must do s are crank sensor & crank pulley from k8 and distrbtor.

ProspectMx3 · Post by **ProspectMx3** » November 13th, 2006, 5:29 pm

Thanks, I changed everything expect the crank sensor from the K8, so I will go do that and find out.