A friend of mine is getting on my nerves

Off-Topic Discussions
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

A friend of mine is getting on my nerves

Post by Juans_93_MX3 »

He talks about how much faster his 96 Talon (non-turboed) is then my car even though we havent raced
I do admit to him, that his car is faster but when I put in the 5speed swap I am going to put him back on his place
But still, he thinks his car is fast. For christ sakes, it only has 140hp and 130ft torque. 2nd gen Toyota Celicas have that same amount of power but they get it earlier at like 3-4k RPMs, not only that, they weigh like 150lbs less, yet they still run 16.1 at the 1/4mile.
His car, just like my car is slow

I am going to get him good because I havent told him I am going to change the engine

Everyone who I race, I'm going to be like "oh yeah, still the stock 1.8L K8 dude, 130hp and 115ft torque", "oh man, you couldnt beat my turd"? "it only has 130hp"

LSD tranny and KLZE, here I come
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: A friend of mine is getting on my nerves

Post by solo_ryder »

Juans_93_MX3 wrote:LSD tranny and KLZE, here I come
You getting axles for that thing? I hope your racing him on the track.

Just remind him that those 4g63 motors are peices of junk and they always run funny, maybe get him to rev it up and his little motor will get crankwalk and you will be the one making fun oh him :o
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Re: A friend of mine is getting on my nerves

Post by Juans_93_MX3 »

solo_ryder wrote:
Juans_93_MX3 wrote:LSD tranny and KLZE, here I come
You getting axles for that thing? I hope your racing him on the track.

Just remind him that those 4g63 motors are peices of junk and they always run funny, maybe get him to rev it up and his little motor will get crankwalk and you will be the one making fun oh him :o
Track, closed area, almost the same thing
From what i understand its a jspec tranny from a mazda lantis so normal K8 MTX axels should work on it
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
User avatar
fieromx3
Supporting Member
Posts: 2743
Joined: June 27th, 2005, 7:58 pm
Location: Guelph, ontario
Contact:

Post by fieromx3 »

yea ud definitly beat him with a standard K8.. i HATE guys like that y do they feels the need they gotta be faster than their friends and everyone else? 4G63 engine are not junk they may not be really reliable but id take that thing over any KL engine or BPT engine anyday and crank walk is not a prob on the 1990-1992.5 years mitsubishi switched the crank to a 7 bolt in 1992 half way thru that year and that is the engine that is prone to crankwalk and it still rarly happens...
Last edited by fieromx3 on August 17th, 2006, 12:16 am, edited 1 time in total.
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
User avatar
wickedmx3
Regular Member
Posts: 312
Joined: February 14th, 2005, 1:20 pm
Location: Cicero, Illinois

Post by wickedmx3 »

Eclipse Turbo vs MX-3 BPT

All I will say is I could see his wide eyes from my rear view mirror.

::spank:: ::spank:: ::spank::
Image
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Post by hgallegos915 »

LET ME AT HIM .. LET ME AT HIM my kf would tear him a new one :) and i dont like my engine lol
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
User avatar
fieromx3
Supporting Member
Posts: 2743
Joined: June 27th, 2005, 7:58 pm
Location: Guelph, ontario
Contact:

Post by fieromx3 »

i should also add the 96 eclipse/talon non turbo doesnt have the 4g63 engine it has the 420A.. so no crank walk for him

the 420A was used in the 95-99 neon and the 95-99 avenger and sebring..
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

I should have know that :P my bro has had 2 dsm's
User avatar
fieromx3
Supporting Member
Posts: 2743
Joined: June 27th, 2005, 7:58 pm
Location: Guelph, ontario
Contact:

Post by fieromx3 »

got any pix of them? tsi awd? id like to see the pix :) any mods done to them? taken to the track?
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
User avatar
happyclown
Regular Member
Posts: 316
Joined: July 18th, 2004, 2:01 am
Location: Vermont
Contact:

Post by happyclown »

Since i've moved closer to the bigger city Ive noticed that nonturbo eclipses are very very popular. Half of them are owned by cockey guys who think they s--- gold, then the other half are riced out chicks with nice kits and neon lights.
fieromx3 wrote:got any pix of them? tsi awd? id like to see the pix :) any mods done to them? taken to the track?
You must miss your talon... Take a look at what I've been hiding for the past couple of months :twisted: fieromx3 only... shhhh don't tell anyone! :roll:
1993 RS Teal
User avatar
fieromx3
Supporting Member
Posts: 2743
Joined: June 27th, 2005, 7:58 pm
Location: Guelph, ontario
Contact:

Post by fieromx3 »

yes i very much do lol twas a really fun car! nice car happy clown! so how u like ur talon?
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Post by Juans_93_MX3 »

You guys think i can beat him in the K8?
KLZE will tear him up a new one
I'll run circles around his car while I beat him
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
User avatar
fieromx3
Supporting Member
Posts: 2743
Joined: June 27th, 2005, 7:58 pm
Location: Guelph, ontario
Contact:

Post by fieromx3 »

o yea i really think u would those n/a talons are pretty slow especially the 2g as there not that light plus it has a neon engine LOL
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

fieromx3 wrote:got any pix of them? tsi awd? id like to see the pix :) any mods done to them? taken to the track?
He had a TSI AWD 90 and a 92 Laser RS FWD, here are pics:

Laser :

Image

Sort of pic of the Talon:

Image
User avatar
fieromx3
Supporting Member
Posts: 2743
Joined: June 27th, 2005, 7:58 pm
Location: Guelph, ontario
Contact:

Post by fieromx3 »

nice talon :-) not much a fan of lasers though and those rims are hidious on that car lol
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
Post Reply

Return to “Off-Topic”