93'... I am about giving up on this one. Does anyone know where you can get replacement door locks with keys? I've tried everywhere.
Trish
Replacement Door/Hatch Locks
-
- Regular Member
- Posts: 36
- Joined: January 14th, 2005, 1:13 am
- Location: London Ontario
shitty deal
ya man about the only place you may get the keys and locks are from the stealership.. might occasiuonally get it from the wreckers... but many ppl dont give there keys in.. good luck though
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
If you get some from a wrecker or J-Yard you can have a key mede by a locksmith for about 75 bucks. If yours are sticky or breaking keys, try getting some graphite from the local hardware store, usually in the door knob or key section. Squirt some into the lock and turn it with the key a few times and it will get much better.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
If you send me your ign cylinder i can get a key made for 3 dollars... well bnetter than paying 75? to change locks yup..delaership or a whole parts car and send me the ign switch and i can send u a copy..i have 5 keys to my mx3.. i know i over did it but hey its 3 dllrs a pop why not..
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
DO NOT use both silicone spray and graphite. You would create a sandy cookie dough that would gum up everything. Use one or the other and stick with it.
I bet you've used both and are probably ok for the moment or maybe cannot notice a difference since the locks are messed up already. On a good set of locks that just need to be lubed it would not be a good idea.
I bet you've used both and are probably ok for the moment or maybe cannot notice a difference since the locks are messed up already. On a good set of locks that just need to be lubed it would not be a good idea.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP