RacingMazda's Project MX-3 (Dyno 475whp@18psi) NEW PIC 4pg

Limegreen mx-3 · Post by **Limegreen mx-3** » June 1st, 2006, 9:40 pm

these years look just like the protege engine and trans but the 98+ kis trans look simlar and different to the lx trans but its worth a try to see if it work with the mx-3 setup. looks beffier and there are some pic on the 4cly tech. under BP tranny

Limegreen mx-3 · Post by **Limegreen mx-3** » June 4th, 2006, 3:58 pm

wed coming soon

BuGS · Post by **BuGS** » June 7th, 2006, 12:41 pm

Limegreen mx-3 · Post by **Limegreen mx-3** » July 1st, 2006, 1:11 am

Another Pic of the 475whp MX-3 and 709whp Civic H22

BuGS · Post by **BuGS** » July 1st, 2006, 2:01 am

post a bigger pic...

And when is this thing gonna have 700whp??

DRAG323 · Post by **DRAG323** » July 2nd, 2006, 11:21 pm

The red Mx-3 that run 10.89 it's me .

I purchase only the shell from D.Lausier.

In my first year i put a stock 1.8 BP with a gt35-40 with 20 psi and i run
a 11.18 @125.

I change the 1.8 for a FE3 2.0l (86x86)stroked to 2236 cc (94x87).
f2t or b2200 crank(94 mm).

I run 10.89 with this motor and the gt35-40(set at 15 psi)
In this run my custom intake open up 6 inchs long on the weld(lost pressure)

Presently i tune my new set up( new turbo GT 42R,Autronic SM4, cams and solid lifters " good for 10,500 rpm" ) for 2 years.

In my last dyno run last year i rev it at 9500 rpm and over 500whp
at only 15 psi with the GT42r.

This year i go on the track for tune , in my 3rd run i toast a rod brg
and break this rod.

New rod in order for a 1.5 month.

I hope run in low 9 this year!

Eric

MechaManZero · Post by **MechaManZero** » July 4th, 2006, 2:35 pm

thats pretty insane man keep me posted eric

Minimonster · Post by **Minimonster** » July 5th, 2006, 9:08 pm

DRAG323 wrote:The red Mx-3 that run 10.89 it's me .

I purchase only the shell from D.Lausier.

In my first year i put a stock 1.8 BP with a gt35-40 with 20 psi and i run
a 11.18 @125.

I change the 1.8 for a FE3 2.0l (86x86)stroked to 2236 cc (94x87).
f2t or b2200 crank(94 mm).

I run 10.89 with this motor and the gt35-40(set at 15 psi)
In this run my custom intake open up 6 inchs long on the weld(lost pressure)

Presently i tune my new set up( new turbo GT 42R,Autronic SM4, cams and solid lifters " good for 10,500 rpm" ) for 2 years.

In my last dyno run last year i rev it at 9500 rpm and over 500whp
at only 15 psi with the GT42r.

This year i go on the track for tune , in my 3rd run i toast a rod brg
and break this rod.

New rod in order for a 1.5 month.

I hope run in low 9 this year!

Eric

Hey what transmission are you using witth the FE3? Are you using the Turbo trans or the none Turbo? Also how much custom work did you have to do to get the motor and trans into the MX-3 Body?

DRAG323 · Post by **DRAG323** » July 5th, 2006, 11:08 pm

Turbo tranny(cryo treat) weld diff.

All motor mount (solid) ,custom axle(length), shifting rod, ect...

Eric

Minimonster · Post by **Minimonster** » July 6th, 2006, 6:59 pm

DRAG323 wrote:Turbo tranny(cryo treat) weld diff.

All motor mount (solid) ,custom axle(length), shifting rod, ect...

Eric

Did you have to modify the frame for the trans to fit?? I wouls love to see a PIC

DRAG323 · Post by **DRAG323** » July 6th, 2006, 9:03 pm

PM your e mail adress and i send you some pics.

The only mod , sledgehammer on the rail for some place for the alt pulley

Eric

Minimonster · Post by **Minimonster** » July 7th, 2006, 12:03 pm

DRAG323 wrote:PM your e mail adress and i send you some pics.

The only mod , sledgehammer on the rail for some place for the alt pulley

Eric

PM sent, Thanks Eric

Limegreen mx-3 · Post by **Limegreen mx-3** » July 26th, 2006, 1:37 pm

Just a quick UPDATE the 2.0 BP took a turn for the worse and is out of the mx-3 getting send to be rebiuld. currently the stock 1.8 BP that was in the first time is back in again. this time we will see just how far a stock BP can really handle. untill them i'll post its #'s laters

Limegreen mx-3