[FS] hatch shade
-
JYOUNYA1
- Regular Member
- Posts: 167
- Joined: August 2nd, 2003, 2:01 am
- Location: Charlotte , NC
- Contact:
[FS] hatch shade
I have a original hatch shade that I bought a long time ago, and I have decided not to put it on my car...I saw on corksport that a replica is being sold at $152 without shipping...I am selling my original one for $120 which is including shipping cost. PM me, email, or reply me if you are interested.
93 MX-3 GS 1.8 Liter V6 Teal Mods: Pace (Maker) Setter Custom Catback/ Phantom Auto Meters: Voltage/ Water temp, Air/Fuel (in which not one gauge except voltage works) / Custom piece of s*** intake / 17" RacingHart Z5000 wrap in Khumos that are dry rotten / Altezza Tail lamps/ Custom Black interior (still in the works)/reverse indiglo gauges/ Push Button Starter/ Viper alarm with Proximity sensor/ Brembo slotted and dimpled rotors/ rear hatch shade/ Pioneer Premier DEH-840MP, ,2 custome fitted 6"inch pioneer door speakers, 1 Pioneer Premier 200 watt amp
-
Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
I dont know why their price has dropped so much, but not too long ago, they used to be worth easilly over $100. Their hard enough to find, but if you want a fiberglass replica, i believe their $150 at corksport.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
rayrrod
- Regular Member
- Posts: 334
- Joined: October 13th, 2001, 2:01 am
- Location: Houston, Texas
- Contact:
what do u mean...dont know
what happened ...the price dropped.
In case you have not noticed, our cars are getting too old.
PPL are upting for newer cars, bigger engines, less hassles getting parts, tired of paying too hign prices for hard to find parts. So there is less demand for our car parts.
Lots of our cars are being scraped, they get more monies than selling the car as a whole.
Just look how many on this board have sold their baby or are thinking of selling.
Also with our cars getting older, they are not worth that much, ie the price (worth) keeps going down.
Its not cost effective to put lots of monies on a car thats not worth much.
Yes, we are proud of our cars but that does not make it worth any more.
Like everything else, prices go down on older parts.
Ya I paid over $2000 for an IBM 8088 but its not worth much, even if it looks almost new.
Best thing is sell as soon as one can, get the best one can..and move on
or keep it forever.
Most ppl are not $$$ savy and will say " if I cant get what I want, i will keep it" That is not smart thinking but to each his own. I have made that mistake many a times, guess i am a slow learner?
In case you have not noticed, our cars are getting too old.
PPL are upting for newer cars, bigger engines, less hassles getting parts, tired of paying too hign prices for hard to find parts. So there is less demand for our car parts.
Lots of our cars are being scraped, they get more monies than selling the car as a whole.
Just look how many on this board have sold their baby or are thinking of selling.
Also with our cars getting older, they are not worth that much, ie the price (worth) keeps going down.
Its not cost effective to put lots of monies on a car thats not worth much.
Yes, we are proud of our cars but that does not make it worth any more.
Like everything else, prices go down on older parts.
Ya I paid over $2000 for an IBM 8088 but its not worth much, even if it looks almost new.
Best thing is sell as soon as one can, get the best one can..and move on
or keep it forever.
Most ppl are not $$$ savy and will say " if I cant get what I want, i will keep it" That is not smart thinking but to each his own. I have made that mistake many a times, guess i am a slow learner?
-
JYOUNYA1
- Regular Member
- Posts: 167
- Joined: August 2nd, 2003, 2:01 am
- Location: Charlotte , NC
- Contact:
ok I will lower the price to $70 shipped...for an OEM Rear hatch shade.
93 MX-3 GS 1.8 Liter V6 Teal Mods: Pace (Maker) Setter Custom Catback/ Phantom Auto Meters: Voltage/ Water temp, Air/Fuel (in which not one gauge except voltage works) / Custom piece of s*** intake / 17" RacingHart Z5000 wrap in Khumos that are dry rotten / Altezza Tail lamps/ Custom Black interior (still in the works)/reverse indiglo gauges/ Push Button Starter/ Viper alarm with Proximity sensor/ Brembo slotted and dimpled rotors/ rear hatch shade/ Pioneer Premier DEH-840MP, ,2 custome fitted 6"inch pioneer door speakers, 1 Pioneer Premier 200 watt amp
-
JYOUNYA1
- Regular Member
- Posts: 167
- Joined: August 2nd, 2003, 2:01 am
- Location: Charlotte , NC
- Contact:
I will post pictures of it tonight, and other items I am selling.
93 MX-3 GS 1.8 Liter V6 Teal Mods: Pace (Maker) Setter Custom Catback/ Phantom Auto Meters: Voltage/ Water temp, Air/Fuel (in which not one gauge except voltage works) / Custom piece of s*** intake / 17" RacingHart Z5000 wrap in Khumos that are dry rotten / Altezza Tail lamps/ Custom Black interior (still in the works)/reverse indiglo gauges/ Push Button Starter/ Viper alarm with Proximity sensor/ Brembo slotted and dimpled rotors/ rear hatch shade/ Pioneer Premier DEH-840MP, ,2 custome fitted 6"inch pioneer door speakers, 1 Pioneer Premier 200 watt amp