hei+external coil for a 95 distributor help

Barambambase · Post by **Barambambase** » February 6th, 2006, 11:39 pm

is gro harlems Do it yourself for a 94-95 distributor good? my wire colors are not gro harlems colors, should i base connections on colors or possition on rear harness (3wires)?????

my distributor is different to gro harlems too. i've searched probetalk, but i havent found good references. anybody has done a 95 distributor? how to disconect coil. i see nothing to disconect the coil,no tabs.

thanks in advance

LooseChangeRacing · February 6th, 2006, 11:57 pm

http://www.mx-3.com/phpbb2/viewtopic.php?t=48965

there are some pics of timpronks diagrams for hei/msd...check em out

Barambambase · Post by **Barambambase** » February 7th, 2006, 12:46 am

thanks for reply

ok i have the wires figured out, now my problem is how to disconnect the coil on my disti.

hgallegos915 · Post by **hgallegos915** » February 7th, 2006, 12:59 am

you gotta brake the metal brackets..are you sure your coil is shot? i did the hei mod and it worked fine..

Barambambase · Post by **Barambambase** » February 7th, 2006, 11:38 am

yes, i did the hei modification first cause i wasnt sure if the coil was shot, and it didnt work, all wiring was good, so now trying external coil.

Im all done with wiring, now only thing left is where to put power tower???

gracias h gallegos.