oks so its been 2 weeks without that aic valve thingy under the throttle body. Car is running AWESOME. It doesnt stall anymore..it would stall when i had my idle low. The ONLY reason thats for is for cold starts..so it was safe..in my case it did noit affect anything. Im getting around 389 -30 mpg i double checked. The car runs smooth..at 3k rpm the first solenoid opens and the car takes off at 5 k the second onn opens and it will have power all the way until around 7k. I need to get this dyno to see what a kfze can really do. I removed the speed limiter wire.. i took the car to 115 mph but i ran out of road (safe road) I am AGAIN leaking transmission oil !! the same sal I had fixed. Imma goi get it professionally done. Paint comes next week.its gona be a strong blue with pear possibly pink pearl
-hec
mx3 update!(long)
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
mx3 update!(long)
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
- vozaday2000
- Regular Member
- Posts: 471
- Joined: November 9th, 2004, 2:01 am
- Location: Calgary, Alberta
- Contact:
hahalakersfan1 wrote:So the moral of the story is if you want your car to run good, set it on fire?
you got to show your car who's boss some how hey, hec.
glad to hear everything worked out.
http://www.cardomain.com/memberpage/730367 - UPDATED!!!!!!!
'94 MX-3 GS KLZE, KL01 Cams, Fidanza Flywheel, Centerforce Dual Friction Clutch, WeaponR Ram Air, 2 1/4 exhaust, Nichi Neptune Rims, Toyo Proxy 45 Rubber.
'94 MX-3 GS KLZE, KL01 Cams, Fidanza Flywheel, Centerforce Dual Friction Clutch, WeaponR Ram Air, 2 1/4 exhaust, Nichi Neptune Rims, Toyo Proxy 45 Rubber.
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
well i still cant fi that transmission seal ill just be adding oil every 2 weeks, it takes a little over a month to drain. I need to get this sucker painted one way or another. i hope tranny holds out. with my luck it wont.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
There are only two seals that it can leak out of (unless you have a cracked housing) The seals are easy to replace so I'd say it is one of two things, you have a messed up axle that is letting the fluid go by, one of your drain or filler bolts isn't tight, or you are just buying really crappy seals. PS, I know that the MX-3 seals can be hard to find, but MX-6 and Probe seals will work just as well.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Ok ill do that, thanks for that adviced...man this transmission can sure take a beatinmg..today i went to 120 mph and car runs fine.. its been leaking little by little..im starting toi think its the shaft ill have seal professionally installed.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!