k8 heads..

GtownMX3v6 · Post by **GtownMX3v6** » June 17th, 2005, 1:26 am

i cant post on the buy/sell section for some reason?? but i was wondering if anyone had a set of k8 heads for sale.. preferably 92.. but if there is no difference then any year. thanks alot.

hppwdn · Post by **hppwdn** » June 17th, 2005, 7:01 am

You have to have 30 posts to post in the for sale forum. I'm almost there with this one.

ccreech · Post by **ccreech** » June 17th, 2005, 8:13 am

I have one Brand spanking new rear K8 head. I don't know if that does you any good without the front but I do have one. It is Mint. Go to the thread about 6 boxes of parts here

bmwm3guy · Post by **bmwm3guy** » June 17th, 2005, 12:42 pm

I could pull the heads off the parts car I have but shipping is gonna be a b***h

Spinkx79 · Post by **Spinkx79** » June 17th, 2005, 12:55 pm

bmwm3guy wrote:I could pull the heads off the parts car I have but shipping is gonna be a b***h

I have 2 ZE heads coming from Bakersfeild CA, to Whitby ON and it cost $40 per head.

so PQ to TN cant be much more.

Have you checked the wreckers??

For what you are gonna have to spend on heads, gaskets kit...blah blah, you might be better off getting a used Probe GT engine (prob like $500) or better yet a KLZE (around $1200)

g/l

Post by **Custommx3** » June 17th, 2005, 12:57 pm

I have a set and u may be close to me.. send me a PM

Spinkx79 · Post by **Spinkx79** » June 17th, 2005, 5:01 pm

This is on ONPOC:

FordRacer
n00b1e

Posted: Sat Jun 11, 2005 7:38 pm Post subject: FS: KLZE motor. complete.

Post subject: FS: KLZE motor. complete.
--------------------------------------------------------------------------------

... and by klze I really mean KL-03.
... and by complete I really mean 'missing a shitload of stuff'

Compression tested at 180 psi + on all clyinders (dry cranked).
Incudes but is not limited to; block, heads, intake manifold, exhaust manifolds, Mazda valve cover(s), oil pan, pistons, camshafts, flux capacitor etc, etc, etc.

Missing: disty, some accessories.

$best offar.

-if it doesn't sell, i'll strip it for spare parts and take it to a recyclers.
-you pick up.
-available as of next weekend (June 18th-19th)
-etc etc etc
-again... $best offar.

I bet you could snag it up cheap, he is in Ottawa.

Slammed6 · Post by **Slammed6** » June 17th, 2005, 10:45 pm

I have a stock K8 with approximately 110,000 miles..and i am looking to get rid of the whole engine cheap.

PS. I just shipped a set of KLZE heads and they costs me about $55 for both heads to ship from California to East coast (can't remember the city or state right now)

Gro Harlem · Post by **Gro Harlem** » June 18th, 2005, 11:28 am

I have a pair with cams for immediate sale....Make an offer

georgechicken · Post by **georgechicken** » June 23rd, 2005, 4:51 pm

I sent you a private message. I'm in Nashville and have pretty much anything you need.... if you didnt get it or care to discuss, then email me privately at georgechicken@yahoo.com
Daniel