No one has tried something like this:
No one has tried something like this:
Brake Upgrade 3000gt Vr4 4piston Calipers And 11.9 Inch Rotors.
4 piston!!
http://www.k-series.ca/how-to/ProbeTalk ... Rotors.htm
I was going to buy a couple of spindles and calipers form the "HUGE Container" sale, and see what i could find close to them at the wreckers.
4 piston!!
http://www.k-series.ca/how-to/ProbeTalk ... Rotors.htm
I was going to buy a couple of spindles and calipers form the "HUGE Container" sale, and see what i could find close to them at the wreckers.
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Pretty aggressive upgrade and one-off modification, you must be planning on some serious racing to need to go to 11.9in rotors. Let us know how the project goes.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- MX-3 Money
- Supporting Member
- Posts: 563
- Joined: May 27th, 2004, 2:01 am
- Location: Oshawa, ON, Canada
- JWMX3
- Senior Member
- Posts: 2060
- Joined: March 23rd, 2004, 2:01 am
- Location: Grassie, Ontario
- Contact:
need? maybe he is goin to do some racing, maybe not , but im probably not the only one on this forum that would want big brakes just cus they look sweeetjschrauwen wrote:must be planning on some serious racing to need to go to 11.9in rotors. .
94' Mx3 GS 0-60 in 7.53s [5 spd conversion / Rebuilt 2.5 KL]
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
I hate to burst a bubble, and maybe cancel a sale of my parts, but did you not know that the Probe is a 5 lug, we have only 4. That means that the rotor won't fit our car any way. He used the stock Probe hub not a Mitsu hub that is why he had to grind to get the caliper to line up with the rotor. I was really excited to see your topic too,
Too bad they don't make spacers that turn 4 lug into 5 lug.
Too bad they don't make spacers that turn 4 lug into 5 lug.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
- Sam Baker
- Regular Member
- Posts: 1461
- Joined: May 23rd, 2003, 2:01 am
- Location: Wellington, New Zealand
corksport sells an 11" brake kit for our cars but it's like $1500 LMAO.. but anywayz that looks really sick on the probe! i'm sure if u could find some big enuff rotors that come in 4 lug pattern, you could use the mitsu 4-piston calipers.
and yes those would be BADASS for racing or just for lookin BADASS
and yes those would be BADASS for racing or just for lookin BADASS
92 Autozam AZ3
Hey man, just notices that you live in Oshawa. I live in Whitby.MX-3 Money wrote:Who cares if you plan on racing or not, thoses are some sweet breaks. I'l love to do that with my mx.
What color is your ride?
Wouldnt mind meeting up and checking out your ZE setup. Will be doing mine soon, im throwing a SC in the mix
- kiwi_MX3
- Regular Member
- Posts: 736
- Joined: August 10th, 2004, 2:01 am
- Location: Backpacking in Canada in vancouver 13march onwards
- Contact:
Without having measured the caliper bolt distance for a probe
i don't know...
But a Mitsubishi V3000 V6 has bolt hole centers of 140mm
the MX3 is no where near that so to use the calipers you have to
get the whole lower ASSY...
i don't know...
But a Mitsubishi V3000 V6 has bolt hole centers of 140mm
the MX3 is no where near that so to use the calipers you have to
get the whole lower ASSY...
Kiwi - Native Bird Of New Zealand, semi-nocturnal, secretive bird
Flightless, though can be found flying firstclass
Poor eyesight, though can spot a good pub at 100yards.
Flightless, though can be found flying firstclass
Poor eyesight, though can spot a good pub at 100yards.