**** Need 15 People...READ THIS!!!! UPDATED APR 4 ****
**** Need 15 People...READ THIS!!!! UPDATED APR 4 ****
I have a broken Stabilizer link, dont want to to pay mazda big $$ for their little dinky ones.
We can get ones made by this guy of we can round up 15 other people.
Anyone interested?
Each kit includes:
*Two Endlinks (Front or Rear)
*All necessary hardware*
*Installation instructions*
Why Should I buy these endlinks?
*Stronger then stock Mazda links* I have heard of several people breaking stock endlinks with Addco sway bars
*Easy to install and more importantly uninstall* Anyone who has removed the endlinks on a six knows what a pain those allen keys are. These links use hex bolts and nuts, so all you need is a socket wrench
*100% stainless steel* Every single piece on these links is stainless to protect them from rusting
*Teflon lined Rod Ends* The rod ends used contain a teflon lining and as such are self lubricated, meaning no grease needed.
*Adjustable* For the hard core racer who wants that extra edge. We recommend most people leave these at the pre-adjusted stock length
*Cheap* The cost of this kit is only slightly more then Mazda's price for one endlink!
Pricing:
The cost for each kit will be under $50 USD. (Front or rear)
Shipping will be by priority mail at the flat rate of 3.95
:
We can get ones made by this guy of we can round up 15 other people.
Anyone interested?
Each kit includes:
*Two Endlinks (Front or Rear)
*All necessary hardware*
*Installation instructions*
Why Should I buy these endlinks?
*Stronger then stock Mazda links* I have heard of several people breaking stock endlinks with Addco sway bars
*Easy to install and more importantly uninstall* Anyone who has removed the endlinks on a six knows what a pain those allen keys are. These links use hex bolts and nuts, so all you need is a socket wrench
*100% stainless steel* Every single piece on these links is stainless to protect them from rusting
*Teflon lined Rod Ends* The rod ends used contain a teflon lining and as such are self lubricated, meaning no grease needed.
*Adjustable* For the hard core racer who wants that extra edge. We recommend most people leave these at the pre-adjusted stock length
*Cheap* The cost of this kit is only slightly more then Mazda's price for one endlink!
Pricing:
The cost for each kit will be under $50 USD. (Front or rear)
Shipping will be by priority mail at the flat rate of 3.95
:
Last edited by Spinkx79 on April 4th, 2005, 11:21 am, edited 1 time in total.
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Appears to be a noteworthy mod that may have merit. I'm quite supprised though that there are no pics considering their size. I believe that I would be quite interested after having seen some pics as stand alone as well as installed. Testimonials by anyone who has/had this product would definitely be an asset. Sounds good, awaiting more detailed information.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
I'm thinkin' to myself, "if it ain't broke - don't fix it". Then there's the other side of me that says "why wait til it breaks". So, I'm very interested.
Scott, Email sent.
Scott, Email sent.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
trust me, you don't want to drive around w/ broken links. I never really thought it was a big deal, but when my front link broke it actually got caught on the cv boot and ripped a huge hole, causing the axel to go bad. Fronts are replaced now, and whatdya know, now a rear one is busted. It seems like once my car hit 100000 miles all the little things started falling apart. If its 50 a set I am in!
93SE-KLDE Theres a big peice of metal inside my other peice of metal now...weird???
im interested:) make sure its really BEEEFY looking one (kinda like the ones you see on the WRX rally cars.
1994, GS, KLZE, 67mm TB, LightFlywheel, Centreforce Stg 3 Clutch, CAI, KL36 ecu, B&M shortshifter, Solid poly mounts, lightweight Aluminum Cross memeber, 2.5 high flo cat, 2.5 all back, Tanabe Exhaust, optima battery, ZX2 HD tokicos, eibach prokit, black altezzas.....
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
-
- Regular Member
- Posts: 779
- Joined: July 3rd, 2003, 2:01 am
- Location: Barrie, Ontario, Canada
- Contact:
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
I got those kind of links on my car (all 4) ..it makes a really annoying squiking sound. I was thinking of removing them for stockers
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- David Witherow
- Regular Member
- Posts: 847
- Joined: February 1st, 2001, 2:01 am
- Location: Brampton/London Ont
- Contact:
you guys know that you can make these for your self right........you can get any of the parts at any local facca fasteners or brafasco or any place like that.....i did it like a few months ago and with tax and everything it came to 100 bucks canadian.......if i can find the recipts then ill post the exact parts and number that you would need.