Ok ok ok...I know...I know. I shoudl do a search and all that jazz. Well, I'm impatient! My question, since it's looking like I will be using a Acura integra intake system (2-piece) I've been wondering where the MAF will go? I mean, I know this is probably a silly question...but I just don't see how it will fit in between the two sections of pipe.
And when I did search it in the FAQs' there was no reference as to where this little sensor goes.
I saw that page but.. i remember blocking off that plastic elbow coming from befind the vaf.. I used to get a cel light come on once in a while. I unplugged and reconnected and it was all set... it wont matter in this setup? do we need it?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
if you're talking about the big blue rubber line, it's for the pcv system so leave it there. the other little nipple is for egr so leave it there also..
I mean the big black plastic elbow thats next to the disty. Its even labled "k801"
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!