Valve Cover
Valve Cover
i was wondering if anyone ever painted their valve cover i am planning on doing this but i dont know what kind of paint to use. I would appreciate any advice thanks
yeah i did my cover rad support and a bunch of other things, i bead blasted is and then i used high temp engine pant ( i got it from autozone) and then a high temp gloss and it turned out awesome it brightens the comparntment alot i did use blue though
CTC Racing
92 1.6L
93 323 Tranny, ACT clutch, Exhaust, cold air intake, MSD Blaster 2 coil, MSD 8.5mm super conductor wires NGK V-power platinum plugs,engine dress up,custom interior(almost done), GS front bumper, GS 5 spoke wheels Painted white.
92 1.6L
93 323 Tranny, ACT clutch, Exhaust, cold air intake, MSD Blaster 2 coil, MSD 8.5mm super conductor wires NGK V-power platinum plugs,engine dress up,custom interior(almost done), GS front bumper, GS 5 spoke wheels Painted white.
- freyguy_412
- Regular Member
- Posts: 321
- Joined: February 13th, 2005, 12:15 pm
- Location: Sparks, NV in the USA
- Contact:
i did mine with a high temp engine paint as well, but i reccomend using one with the ceramics in it. duplicolor makes them and their really inexpensive at autozone. i used the same paint on my interior as well, because the ceramic is really tough and i didnt want a regular paint to bubble or crack in the heat. no problems in the interior either.
It might be slow, but it's not a civic!