Removing front bumper?

4-Cyl. Technical/Performance Discussions
Post Reply
andyvich
Regular Member
Posts: 60
Joined: January 9th, 2005, 3:43 pm
Location: SLO, CA
Contact:

Removing front bumper?

Post by andyvich »

How hard is it? I dont have a manual and need to do it later today. Any hiddin screws or brackets to look out for? Is it pretty straighforward?

Thanks for any help!! :!:
//ANDREW / Project MXpedition is in full-effect / http://www.silverbulletracing.com
|W|A|S|T|I|N|G| |M|O|N|E|Y| |O|N| |C|A|R|S| my Anti-Drug
User avatar
fry_81
Regular Member
Posts: 1898
Joined: April 22nd, 2004, 2:01 am
Location: Barrie, Ontario, Canada
Contact:

Post by fry_81 »

extremely straight forward, there arnt any hidden bolts, but if you ever get stuck just give a bit of a pull on the bumper to find where its still holding on and look in that area. shouldnt take more than 20 minutes.
1994 5spd GS Parts Car For Sale 800obo. e-mail for details. fry_81@hotmail.com
User avatar
Joey's mx
Regular Member
Posts: 929
Joined: April 1st, 2004, 2:01 am
Location: Canada
Contact:

Post by Joey's mx »

Pretty easy!!! If i remember correctly(its been a while since i had a stock bumper) there are 2 on top....2 behind signal lights....2 at fenders...and 2 brackets at the bottom corners!!! Good luck!!
andyvich
Regular Member
Posts: 60
Joined: January 9th, 2005, 3:43 pm
Location: SLO, CA
Contact:

Post by andyvich »

hey thanks for the replys
//ANDREW / Project MXpedition is in full-effect / http://www.silverbulletracing.com
|W|A|S|T|I|N|G| |M|O|N|E|Y| |O|N| |C|A|R|S| my Anti-Drug
Post Reply

Return to “4-Cyl. Technical/Performance”