18's...can they fit...sure they can!

This forum is for Discussion on Suspension issues.
Post Reply
schuttie2002
Supporting Member
Posts: 425
Joined: June 2nd, 2002, 2:01 am
Location: PA

18's...can they fit...sure they can!

Post by schuttie2002 »

Although I'm not a guy that desires more show then go, sometimes good deals are just to hard to pass up. A buddy of mine has 18's with 205/35 tires on them that hes getting rid of cheap. I wasn't sure they would fit and I looked at all the posts and most guys say they have no problem. i then decided I'd look around for a tire calculator, and came up with some interesting results that can clear the air for all the guys who want bigger rims. if you compare our stock rim and tire combo(on a gs) which is 205/55/15's to a 205/35/18, the 18's with that tire actually have a 0.23" smaller height, and a 0.72 " smaller circumference. I just thought that was pretty interesting, and has erased all of my doubts that the 18's will fit. they may make my brakes look tiny, and slow me down b/c they are a little heavier, they will look pretty good. Hope this clears the air for some other guys, and if you are interested in any other calculations you can use this site:
http://www.dakota-truck.net/TIRECALC/tirecalc.html
good luck and I hope this helps.
93 GS-DE,mx6 tranny, obx 2nd gen headers, highflow cat n 2.25" catback, 65mm tb,CAI, mazdaspeed mounts, SPEC Stage I clutch kit, new K8 flywheel, SRD C.A.B., Intrax, S.T. braces
http://www.cardomain.com/memberpage/698108
RizzeRocket
Regular Member
Posts: 111
Joined: February 4th, 2005, 11:06 pm
Location: Ottawa

Post by RizzeRocket »

i have 18s on my gs:)
User avatar
jschrauwen
Forum Moderator
Posts: 6052
Joined: September 27th, 2003, 2:01 am
Location: Frankford, Ontario, Canada
Contact:

Post by jschrauwen »

I always thought that 205 is 205 is 205, no matter how you slice it.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
Image
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
schuttie2002
Supporting Member
Posts: 425
Joined: June 2nd, 2002, 2:01 am
Location: PA

Post by schuttie2002 »

205 would be the width i.e. having nothing to do with 18 " tall but with the 7 " wide
93 GS-DE,mx6 tranny, obx 2nd gen headers, highflow cat n 2.25" catback, 65mm tb,CAI, mazdaspeed mounts, SPEC Stage I clutch kit, new K8 flywheel, SRD C.A.B., Intrax, S.T. braces
http://www.cardomain.com/memberpage/698108
Post Reply

Return to “Suspension/Brakes/Wheels/Tires”