![Laughing :lol:](./images/smilies/icon_lol.gif)
Just Finished my Head Job!
Just Finished my Head Job!
and boy does the car run great! No more rough idle and i actually run on 4 cyl now and not 3.....hahah! Alot more power now too..just all around , love the out come and only cost $300 cdN FOR THE all the work, I did most of the work my self...........just so you all know whats going on, one of my Valves were burnt pretty bad ![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
Derek Van Horne MX-3.com Member # 33
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
hey maybe he swapped the sohc in there.. ya never know what some crazy people might do ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
Yeah, it's a 1994 4 banger DOHC and , just drove her for like a good 2 hours and feels great! lol
Derek Van Horne MX-3.com Member # 33
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
i did the same on my sohc 92 but i didn't do the work it cost me 975cdn but that is a new WPump , TBelt all new valves and guides all gaskets Felpro. Fuel injectors cleaned and also setting the cam gear back to spec because somebody had advanced it one tooth and my mechanic said that was part of the problem.
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
I got mine done for around 120 dlls over here in mexico...WOW nice job.. At first when u start it it taps like crap because the oil hast filled the lifters i guess..anywho after having it on for a few minutes the tapping went away forever. I love the pussing sound this engine has hehe and wiw the power it had compared to before..nice nice
to bad its my mothers car heeh but still I like this engine..noticing it was a good engine because well the new cars have them with the fdifference that they are coil pack instead of disty. ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Like i have been saying , car runs amazing...but on cold mornings, i get some white smoke comming out of the exhaust, it goes away after about 10 or 20 seconds.......any idea what is going on? I'm thinking, everything is just getting settle in...or do i have a problem? LIke i said, obly when i start up on cold mornings....and the car really hasn't been broken in yet with the new engine work...what you guys think? thanx ![Shocked :shock:](./images/smilies/icon_eek.gif)
![Shocked :shock:](./images/smilies/icon_eek.gif)
Derek Van Horne MX-3.com Member # 33
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
its just moisture. i have the same problem but then again rite now i have no cat. now if the car is at opperating temp and its doing it then you have a problem. just wait for it to warm up a little let it run at an idle for a minute or so and you should be good to go.
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
Aright, sounds good...I was hoping for that kind of response, thanx
Derek Van Horne MX-3.com Member # 33
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
just picked up my new cyclender head for my 93 SOHC had 2 burned Valves and one cracked!! LOL 500,000km on it!! gona put it on tomorrow let you guys know how it runs after!! hopefully I will not have any blow by the rings!! but if so I will rebuild the bottem end in the spring!! LOL can't complane with having 500,000km on it and just haveing a bured valve
- Typhoonk
- Regular Member
- Posts: 1138
- Joined: December 31st, 2002, 2:01 am
- Location: Bowmanville
- Contact:
Hey guys;
I've messing with the idea of giving my BP head a refresher. Was wondering if there were any good engine shops that have good prices for head jobs?
or how much money I should be looking at spending? and what should I replace while the head is off?
I've messing with the idea of giving my BP head a refresher. Was wondering if there were any good engine shops that have good prices for head jobs?
or how much money I should be looking at spending? and what should I replace while the head is off?
-------------------------------------------------------
Got to sell one of my cars to cover the bills
2002 Mazda Protege 5 - Manual, Blue colour fully loaded
PM for info
Got to sell one of my cars to cover the bills
2002 Mazda Protege 5 - Manual, Blue colour fully loaded
PM for info