Not to steel your post but when looking into doing that is it sometimes better to take the parts somewhere and have someone do it professionally? Or can you just use a dermal and take your time to do it? Only curious cause I’ve thought about doing that for a while.
I`ll take lots of pictures this spring, when all my stuff is in
SRD front control arm bushings
hvac panel
new oil cap (had to get a new shiny one after polishing this)
Ground control`s + helpersprings
custom pedals made for Mx3
Konig Rated R 7.5x18 (white)
My inverted cf hood
Sideskirts
Rollcage
4-point harness
Civic projectors
If you get the right tools for a dremel you can do that yourself. But it takes alot of pateince. So that is why i'm not very good at it. I tried it on my front valve cover and it worked out alright. But not as good as that one.
THIS USER HAS BEEN BANNED, DO NOT DEAL WITH HIM. - MX-3.com Admin
I was thinking the same thing. There's spots missed on the valve cover and the intake manifold. From what I can see they used a big electric sander. And it looks like they warped it a bit in one spot on the valve cover........ Any polishing work should all really be done by hand, and take's forever!
Man i thought i was the onlyone that saw all the spots that werent polished, and the places where it was overdone, so wouldnt say anything..
Hope youre going to like your SRD Front control arm bushings Nope, so far i Hate mine!
I followed all the instructions excactely, nevertheless at first they made clonkingsounds climbing curbs and driving on uneven roads, then i tryed tightening them some extra from the advice from the guy at SRD now they have a horrible squeaklike sound all the time "and yes they were lubed"
I am so regretting that i didnt get the mazdaspeeds at first, but maybe itll end with me tossing the SRD's in the bin and getting them anyway
So good luck with them
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies