2.5 KL03 for sale and ZE IM

A Forum For Ontario MX-3 Club Related Topics.
Post Reply
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

2.5 KL03 for sale and ZE IM

Post by EZ_4_FUN »

Its currently running very well in my mx-3. Im selling it so i can pick up a ZE

It has about 150 K

Pick up in London Ontario. $400 CDN O.B.O

Includes complete motor w/o tranny

Also available is a straight neck ZE IM for next to nothing. Make an offer
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
Rick Johnson
Regular Member
Posts: 677
Joined: July 24th, 2002, 2:01 am
Location: Calgary

Re: 2.5 KL03 for sale and ZE IM

Post by Rick Johnson »

Hey are you sure on that milage? and thats for the 2.5l kl03 w/150,000 KM?? Do you have the motor out of your car yet? I might be rolling thru ontario this week on friday, cause I'm buying a mx-6 in PA which ill be driving back to Sask here, but the mx6 is miled out pretty hard so I would like to pick up a motor on the way back...
Image
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by EZ_4_FUN »

$350 CDN for the motor

$200 For a KLZE Intake Manifold

$500 for both

pick up in London Ontario
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
Selecta
Regular Member
Posts: 802
Joined: April 1st, 2004, 2:01 am
Location: Toronto
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by Selecta »

Hey Oscar,
Wanted to know if you still had the engine and everything. Very interested. Msg me back or MSN me @ youday@hotmail.com after 6pm.
Friends are just enemies who lack the testicular fortitude to kill you.

I'm a 2min man in a 1min universe

94 GS - KLZE, Spec2 Clutch, Fidanza 9lbs FW, 2 1/4 full magnaflow exhaust. 145WHP / 147WTQ
User avatar
DavidOS
Regular Member
Posts: 1565
Joined: March 16th, 2004, 2:01 am
Location: ottawa, ONT
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by DavidOS »

Yes he still has the engine and stuff... from what i saw:D
1994, GS, KLZE, 67mm TB, LightFlywheel, Centreforce Stg 3 Clutch, CAI, KL36 ecu, B&M shortshifter, Solid poly mounts, lightweight Aluminum Cross memeber, 2.5 high flo cat, 2.5 all back, Tanabe Exhaust, optima battery, ZX2 HD tokicos, eibach prokit, black altezzas.....

http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
User avatar
Selecta
Regular Member
Posts: 802
Joined: April 1st, 2004, 2:01 am
Location: Toronto
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by Selecta »

did you see on the weekend?
Friends are just enemies who lack the testicular fortitude to kill you.

I'm a 2min man in a 1min universe

94 GS - KLZE, Spec2 Clutch, Fidanza 9lbs FW, 2 1/4 full magnaflow exhaust. 145WHP / 147WTQ
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by EZ_4_FUN »

IM - SOLD

Motor is still available and passed emissions on May 15 with flying colours

I also have a distributor available if anyone is interested in it

Also a probe oem clutch with life still in it. I thought it was toasted, but it turns out my flywheel was somewhat greasy so it was slipping alot.

This stuff is either going to the junkyard, or someone with half a brain is going to pick it up

The stuff is located in London Ontario and is available for viewing at any time.

Call 519-851-7786 and ask for Gabi.

while your at it, you may want to ask him how much he'll charge you to install it in your car. Hes an awesome guy and will do it for a very reasonable price.

I belive DAVIDOS just did his ZE swap a week or 2 ago with Gabi.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
DavidOS
Regular Member
Posts: 1565
Joined: March 16th, 2004, 2:01 am
Location: ottawa, ONT
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by DavidOS »

yah i did:)

to bad i didnt get to meet you man:) woulda been good.

ah well when your down again let me know we will all roll out together.
1994, GS, KLZE, 67mm TB, LightFlywheel, Centreforce Stg 3 Clutch, CAI, KL36 ecu, B&M shortshifter, Solid poly mounts, lightweight Aluminum Cross memeber, 2.5 high flo cat, 2.5 all back, Tanabe Exhaust, optima battery, ZX2 HD tokicos, eibach prokit, black altezzas.....

http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
User avatar
Selecta
Regular Member
Posts: 802
Joined: April 1st, 2004, 2:01 am
Location: Toronto
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by Selecta »

Hey Oscar,
I am waiting for David to make arrangements to pick up the engine from Gabbi.
Friends are just enemies who lack the testicular fortitude to kill you.

I'm a 2min man in a 1min universe

94 GS - KLZE, Spec2 Clutch, Fidanza 9lbs FW, 2 1/4 full magnaflow exhaust. 145WHP / 147WTQ
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by EZ_4_FUN »

The Engine was sold along with the Intake Manifold


Sorry but it took so long. I had someone pay me the same day i spoke with him.

You know the saying... Money talks and bull**** walks.. lol


Sorry
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
Selecta
Regular Member
Posts: 802
Joined: April 1st, 2004, 2:01 am
Location: Toronto
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by Selecta »

aight
Friends are just enemies who lack the testicular fortitude to kill you.

I'm a 2min man in a 1min universe

94 GS - KLZE, Spec2 Clutch, Fidanza 9lbs FW, 2 1/4 full magnaflow exhaust. 145WHP / 147WTQ
User avatar
David Witherow
Regular Member
Posts: 847
Joined: February 1st, 2001, 2:01 am
Location: Brampton/London Ont
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by David Witherow »

hey U sorry but i havent been able to get home to go and look at it for you sorry...working sucks
User avatar
Selecta
Regular Member
Posts: 802
Joined: April 1st, 2004, 2:01 am
Location: Toronto
Contact:

Re: 2.5 KL03 for sale and ZE IM

Post by Selecta »

Yes kinda down :( that I missed out on the engine..but then again you were doing me the favour so if you couldn't then it's cool. But if you come across something like that again let me know even if it's a good price on a ZE..I am heading back on the road for a month so I won't be able to check for myself..but I will be on the forum so just leave me a message and let me know or something.
Friends are just enemies who lack the testicular fortitude to kill you.

I'm a 2min man in a 1min universe

94 GS - KLZE, Spec2 Clutch, Fidanza 9lbs FW, 2 1/4 full magnaflow exhaust. 145WHP / 147WTQ
Post Reply

Return to “Ontario MX-3 Club”