is this a real klze?
Re: is this a real klze?
Thenk you man! I started the complaint file and looks really promising! I hope I can get my cash back! I have a hard time to earn 750$!!
European Mx3 GsRT
-
- Junior Member
- Posts: 28
- Joined: March 11th, 2004, 2:01 am
- Location: nova scotia
Re: is this a real klze?
hey korban did you get your engine yet?if not report them to the BBB i did and maybe we'll get better results from osaka if they have a few complaints.i talked to a lawyer today he said he couldn't beleive osaka could try to pull off what their doing but he told me i would pay less for shipping then hiring a lawyer.and by the way when i last spoke with osaka he told me that if there was an egr on my engine it didn't come from japan well mine has an egr,but they still refuse to send me a ze unless i pay shipping and the guy is so ****y about it.this is so frustrating i live in n.s. so it's quite a ways to travel,is there anyone who lives near osaka who would be willing to go over there and punch a guy named john in the mouth?
-
- Regular Member
- Posts: 132
- Joined: September 12th, 2001, 2:01 am
- Location: guelph, ontario, canada
- Contact:
Re: is this a real klze?
still holding tight on an engine one dosnt arrive by monday i might take that drive for you.
Re: is this a real klze?
yeah dude. I will report Osaka to the BBB too. IF someone gets me a link, I will file a complaint. They f#@%ed my pretty good too!
93 GS, KLZE, KL31 ECU, Centerforce Stg 3 Clutch, 2.25" Exhaust w/Flowmaster muffler, OBX Headers, Pheno Spacers, Front & rear X-drilled/slotted Rotors, KVR pads, SS brake & clutch lines, Ractive Filter, H&R Springs, Tokico Blue Struts, 8mm Accel Wires, MSD 6A w/ Blaster 2 Coil, HVAC Indiglo Panel. *Sold*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
-
- Junior Member
- Posts: 28
- Joined: March 11th, 2004, 2:01 am
- Location: nova scotia
-
- Regular Member
- Posts: 132
- Joined: September 12th, 2001, 2:01 am
- Location: guelph, ontario, canada
- Contact:
Re: is this a real klze?
one for the ze experts.. new one on its way with kl31 stamped on its head ... is this one finally a klze ? if not is it better or worse?
Advice...
Thanks..
Advice...
Thanks..
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: is this a real klze?
yes it's a ze..it will come witha straight neck intake manifold...it came from a j-spec mx6
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Regular Member
- Posts: 132
- Joined: September 12th, 2001, 2:01 am
- Location: guelph, ontario, canada
- Contact:
Re: is this a real klze?
though it came with curved neck with kl31 mmm...
ill see when it gets here hopefully this ones clean too
ill see when it gets here hopefully this ones clean too
Re: is this a real klze?
i believe newer year kl's in the states came with the same head kl31 heads as jdm ze as well as squared ports and dont also forget that us cams are also labeled kl01.
did any of you guys care to look at the link posted on the first page?
http://geocities.com/viv95pgt/klze.html
did any of you guys care to look at the link posted on the first page?
http://geocities.com/viv95pgt/klze.html
-
- Regular Member
- Posts: 528
- Joined: January 23rd, 2004, 2:01 am
- Location: East Grand Forks, MN
Re: is this a real klze?
Old post, but whatever happened to these guys?! This should really be a sticky saying how much Osaka sucks!! I almost baught from them.... good thing I pulled my head out of my *** ....
THIS USER HAS BEEN BANNED, DO NOT DEAL WITH HIM. - MX-3.com Admin
-
- Junior Member
- Posts: 28
- Joined: March 11th, 2004, 2:01 am
- Location: nova scotia
Re: is this a real klze?
well in the end i had to pay to ship the engine back and they paid to ship me the real klze,it was cheaper than getting a lawyer.
i would not recommend anyone buy from osaka the guy there was a total a$$hole,and the engine that i finally got, although it was very clean it had a big hole burned into the timing belt cover right through the timing belt where i'm assuming they used a torch to cut the motor mount.I thought i would be saving money with osaka but in the end after paying shipping twice and all the other aggravation of dealing with those a$$holes it wasn't worth it.And by the way the better business bureau is completely useless.
i would not recommend anyone buy from osaka the guy there was a total a$$hole,and the engine that i finally got, although it was very clean it had a big hole burned into the timing belt cover right through the timing belt where i'm assuming they used a torch to cut the motor mount.I thought i would be saving money with osaka but in the end after paying shipping twice and all the other aggravation of dealing with those a$$holes it wasn't worth it.And by the way the better business bureau is completely useless.
-
- Regular Member
- Posts: 528
- Joined: January 23rd, 2004, 2:01 am
- Location: East Grand Forks, MN
Re: is this a real klze?
I just don't understand how people like this can even stay in business. Did the KL-ZE you got finally actually half way decent? That proves that they aren't just retarded, but truely trying to screw people.
THIS USER HAS BEEN BANNED, DO NOT DEAL WITH HIM. - MX-3.com Admin
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: is this a real klze?
how can a engine get that dirty!?!?!?!??!
damn, i never noticed those pics before....good lord!
damn, i never noticed those pics before....good lord!
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
-
- Regular Member
- Posts: 528
- Joined: January 23rd, 2004, 2:01 am
- Location: East Grand Forks, MN
Re: is this a real klze?
I know isn't that crazy?! Lots of not changing oil!!
THIS USER HAS BEEN BANNED, DO NOT DEAL WITH HIM. - MX-3.com Admin