Wait a minute, I thought V6 MX3s had 170ft Torque!?
Wait a minute, I thought V6 MX3s had 170ft Torque!?
Someone in this forum told me they only have 120. I thought they had more than that.
Is it true that V6 MX3s have 170ft Torque?
Is it true that V6 MX3s have 170ft Torque?
-
- Supporting Member
- Posts: 730
- Joined: January 11th, 2003, 2:01 am
- Location: Jacksonville, FL Area
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
I think that would be the KL-ZE
'93 GS sporting 31 ZE, 36 ECU, Millenia IM & TB, Beefed up tranny, Fidanza FW, CM Stage II-R, Al UDP, HS Headers, MF Hi-Flow CAT, 2.5" Piping, CAI, MGC Wires, MS Mounts, B&M SS, Bronzoils, SS B & C Lines, Brembos...more.
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
did you read that it has 170tq or you "thought" cause thoughts arent always right lmao. its ~115tq
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
and klze's are 160 of torque
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
omf! when is the idiocy going to end?
![Rant2 :rant2:](./images/smilies/rant2.gif)
![Rant2 :rant2:](./images/smilies/rant2.gif)
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
its 195 tq i believe on klzeOriginally posted by babyblueMX3:
and klze's are 160 of torque
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
I belive tq depends on if you have the Millenia or the Mx-6 cams
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
nah i saw i dyno it wasn't near 195.....Originally posted by mitmaks:
its 195 tq i believe on klzeOriginally posted by babyblueMX3:
and klze's are 160 of torque
and what Nd4SpdSe said is also true..
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Supporting Member
- Posts: 730
- Joined: January 11th, 2003, 2:01 am
- Location: Jacksonville, FL Area
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
Yeah I've seen tq range from ~160 to ~175 on the ZE. Depends on a few factors. But there's def. not that much in the stock V6.
'93 GS sporting 31 ZE, 36 ECU, Millenia IM & TB, Beefed up tranny, Fidanza FW, CM Stage II-R, Al UDP, HS Headers, MF Hi-Flow CAT, 2.5" Piping, CAI, MGC Wires, MS Mounts, B&M SS, Bronzoils, SS B & C Lines, Brembos...more.
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
KLZE makes 22.8 kg/m, converted that is about 164 ft/lbs at 5500rpm
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
I am talking about a 93 V6 MX3. Not no MX6 or 95 MX3. I just thought I would tell you guys this because someone told me that MX3s have 170ft Torque. Not 120!
Now can I get some comfirmation that my 93 MX3 has 170ft Torque?
Now can I get some comfirmation that my 93 MX3 has 170ft Torque?
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
no. It does not. Not even close. ALL stock v6 mazda mx3's have roughly 115 ft lbs of torque.
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
there you go.....and I'm not sure where did you get the idea that 95 engines were different than the others
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Supporting Member
- Posts: 730
- Joined: January 11th, 2003, 2:01 am
- Location: Jacksonville, FL Area
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
![Confused2 :confused2:](./images/smilies/confused2.gif)
'93 GS sporting 31 ZE, 36 ECU, Millenia IM & TB, Beefed up tranny, Fidanza FW, CM Stage II-R, Al UDP, HS Headers, MF Hi-Flow CAT, 2.5" Piping, CAI, MGC Wires, MS Mounts, B&M SS, Bronzoils, SS B & C Lines, Brembos...more.
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: Wait a minute, I thought V6 MX3s had 170ft Torque!?
yup, how do you expect a engine that is rated at 130hp to make MORE torque when its got such a small displacement?
THe stock torque rating is 115 btw. The 2.5 KLZE doesn't even make 170 ft/lbs stock.
THe stock torque rating is 115 btw. The 2.5 KLZE doesn't even make 170 ft/lbs stock.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM