Bunny Hopping

V6 Technical/Performance Discussions
Nallboy
Supporting Member
Posts: 730
Joined: January 11th, 2003, 2:01 am
Location: Jacksonville, FL Area

Re: Bunny Hopping

Post by Nallboy »

Hey I once had a prob kinda like that. wasn't really "wheel hopping" but the engine would seriously surge back and forth. Mine, too, was fine in every gear but first. I finally saw that the intake accordion-looking thingy was really worn out and cracked underneath. It was sucking air when the engine would surge. I replaced it and all's well now. Don't know if that helps at all, but you might want to check it cause if that's it, it's a simple $80 plug and play fix. :shrug:
'93 GS sporting 31 ZE, 36 ECU, Millenia IM & TB, Beefed up tranny, Fidanza FW, CM Stage II-R, Al UDP, HS Headers, MF Hi-Flow CAT, 2.5" Piping, CAI, MGC Wires, MS Mounts, B&M SS, Bronzoils, SS B & C Lines, Brembos...more.
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
mx-3xplosiv31
Regular Member
Posts: 53
Joined: February 16th, 2004, 2:01 am
Location: Michigan

Re: Bunny Hopping

Post by mx-3xplosiv31 »

my 92 K8 is doing it too, but in any gear, up to like 25 miles an hour. I do have a bad CV on the pass. side, gonna replace it and see if that cures the problem, if not, then on to other issues.

Aaron
Dino700
Junior Member
Posts: 15
Joined: May 10th, 2002, 2:01 am
Location: Australia

Re: Bunny Hopping

Post by Dino700 »

Thanks for your help guys..appreaciate it
Post Reply

Return to “V6 Technical/Performance”