just got the supposedly KLZE in
just got the supposedly KLZE in
now the head codes read kl-101 and kl-1a1 doesnt that mean its a KLDE? the wrong motor
Sacramento Raceway, CA
92 Mx3 GS
New Time 13.82 at 101.75 2.205 60ft (RIP beast klze engine)
Updated mods now... KFZE, SS Autochrome Headers and a Sweet a-- 3' Electric Cutout after it, KFZE LSD trans, Millenia manifold, KL36 ecu, Blown motor mounts, custom CAI, Custom ground wire kit, 9mm Plug wires, 2 1/4 exhaust, (Hei and MSD external coil mod), all accessories.
92 Mx3 GS
New Time 13.82 at 101.75 2.205 60ft (RIP beast klze engine)
Updated mods now... KFZE, SS Autochrome Headers and a Sweet a-- 3' Electric Cutout after it, KFZE LSD trans, Millenia manifold, KL36 ecu, Blown motor mounts, custom CAI, Custom ground wire kit, 9mm Plug wires, 2 1/4 exhaust, (Hei and MSD external coil mod), all accessories.
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: just got the supposedly KLZE in
yup wrong engine.....you want head code KL31
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
Re: just got the supposedly KLZE in
i knew that stupid old man would send me the wrong engine... word to the wise NEVER buy from Engines R US they suck. the ****er never even called me and told me when they were going to deliver it. just a bad company<p>[ September 09, 2003: Message edited by: Custommx3 ]</p>
Sacramento Raceway, CA
92 Mx3 GS
New Time 13.82 at 101.75 2.205 60ft (RIP beast klze engine)
Updated mods now... KFZE, SS Autochrome Headers and a Sweet a-- 3' Electric Cutout after it, KFZE LSD trans, Millenia manifold, KL36 ecu, Blown motor mounts, custom CAI, Custom ground wire kit, 9mm Plug wires, 2 1/4 exhaust, (Hei and MSD external coil mod), all accessories.
92 Mx3 GS
New Time 13.82 at 101.75 2.205 60ft (RIP beast klze engine)
Updated mods now... KFZE, SS Autochrome Headers and a Sweet a-- 3' Electric Cutout after it, KFZE LSD trans, Millenia manifold, KL36 ecu, Blown motor mounts, custom CAI, Custom ground wire kit, 9mm Plug wires, 2 1/4 exhaust, (Hei and MSD external coil mod), all accessories.
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: just got the supposedly KLZE in
WTF are you talking about the wrong one, its a KLZE, its just from a Millenia and not a Mx-6<p>If it was a KLDE, it would say KL03
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Regular Member
- Posts: 1074
- Joined: July 30th, 2003, 2:01 am
- Location: Cape Cod, MA
- Contact:
Re: just got the supposedly KLZE in
http://geocities.com/viv95pgt/klze.html<p>Its an american spec engine<p>Where did you buy it from so I can avoid them<p>[ September 08, 2003: Message edited by: TsiMiata ]</p>
93 MX-3 GS- ZE, KL31 ECU, Fidanza Flywheel, CM Stage 2-R clutch, Hotshot Headers
99 Subaru Impreza RS, the new toy
91 Eagle Talon Tsi AWD *RIP*
99 Subaru Impreza RS, the new toy
91 Eagle Talon Tsi AWD *RIP*
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: just got the supposedly KLZE in
umm i think this needs to be cleared up for the 30th time. Anyone?
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: just got the supposedly KLZE in
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Nd4SpdSe:
WTF are you talking about the wrong one, its a KLZE, its just from a Millenia and not a Mx-6<p>If it was a KLDE, it would say KL03<hr></blockquote>
Wrong....a ZE will say KL31. sounds like he got a 626/ MX6 engine. KL plain ol' 2.5. Still a kick in the butt though.<p>[ September 08, 2003: Message edited by: Darren Hyderman ]<p>[ September 08, 2003: Message edited by: Darren Hyderman ]</p>
WTF are you talking about the wrong one, its a KLZE, its just from a Millenia and not a Mx-6<p>If it was a KLDE, it would say KL03<hr></blockquote>
Wrong....a ZE will say KL31. sounds like he got a 626/ MX6 engine. KL plain ol' 2.5. Still a kick in the butt though.<p>[ September 08, 2003: Message edited by: Darren Hyderman ]<p>[ September 08, 2003: Message edited by: Darren Hyderman ]</p>
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
-
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
Re: just got the supposedly KLZE in
Edited because I dont know what rules are.<p>[ September 09, 2003: Message edited by: Custommx3 ]</p>
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: just got the supposedly KLZE in
man, i can't even rembmer the right codes of my own engine, or am i getting mixed up with the cams...bah, it doesnt matter. I guess my mom is right, i should goto bed early 2nite
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: just got the supposedly KLZE in
could we have a mod edit that last very rude post? people.....
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: just got the supposedly KLZE in
yeah, if your motor is a KLDE it'll read KL-03 and kL101 on the heads.<p>ur motor is not a ZE, sorry bro, must suck having it all installed and everytyhing
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
- monstar-mx-3
- Regular Member
- Posts: 1112
- Joined: February 28th, 2002, 2:01 am
- Location: vancouver
Re: just got the supposedly KLZE in
give the guy soem credit. some times when you do a seach, it hard to read thought all the post. He just need a simply anser. I'm looking for a ze right now, and there is so much information out there..it is very confusing.
Re: just got the supposedly KLZE in
Go to the V6 FAQ, show all posts, and scroll down to the last but one.
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
-
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
Re: just got the supposedly KLZE in
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by curtklze:
Edited because I dont know what rules are.<p>[ September 09, 2003: Message edited by: Custommx3 ]<hr></blockquote><p>hahahahaha <p>please read my sig.<p>hahaha
Edited because I dont know what rules are.<p>[ September 09, 2003: Message edited by: Custommx3 ]<hr></blockquote><p>hahahahaha <p>please read my sig.<p>hahaha
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
-
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
Re: just got the supposedly KLZE in
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by monstar-mx-3:
give the guy soem credit. some times when you do a seach, it hard to read thought all the post. He just need a simply anser. I'm looking for a ze right now, and there is so much information out there..it is very confusing.<hr></blockquote><p>hey I need a BMW, can you give buy me one?, I also need to wash my self can you do that for me as well?<p>I researched for 3 months befor I decided to do this swap and I had to sort through a bunch of miss information, now all the answers are on this board in the FAQ, or can be found whith a simple seach.<p>as I said this HAS BEEN ANSWERD ALREADY. why should anyone respond this question?
give the guy soem credit. some times when you do a seach, it hard to read thought all the post. He just need a simply anser. I'm looking for a ze right now, and there is so much information out there..it is very confusing.<hr></blockquote><p>hey I need a BMW, can you give buy me one?, I also need to wash my self can you do that for me as well?<p>I researched for 3 months befor I decided to do this swap and I had to sort through a bunch of miss information, now all the answers are on this board in the FAQ, or can be found whith a simple seach.<p>as I said this HAS BEEN ANSWERD ALREADY. why should anyone respond this question?
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.