Hi guys,<p>Can anyone tell me what the max hp is for the tranny and drivers axels?
If I want to get 300/350 hp out of the engine, what tranny do you prefer?
Thanks<p>Dennis
max power questions
-
TsiMiata
- Regular Member
- Posts: 1074
- Joined: July 30th, 2003, 2:01 am
- Location: Cape Cod, MA
- Contact:
Re: max power questions
all the trannies are the same. They all get weak around 300hp.<p>having stronger axles made isn't a big deal. stronger tranny is.
93 MX-3 GS- ZE, KL31 ECU, Fidanza Flywheel, CM Stage 2-R clutch, Hotshot Headers
99 Subaru Impreza RS, the new toy
91 Eagle Talon Tsi AWD *RIP*
99 Subaru Impreza RS, the new toy
91 Eagle Talon Tsi AWD *RIP*
-
dennisvs
- Regular Member
- Posts: 111
- Joined: January 6th, 2003, 2:01 am
- Location: The Netherlands
- Contact:
Re: max power questions
thought so.
the axels can be made. but how much can the stock ones have?
any suggestions for a tranny?
the axels can be made. but how much can the stock ones have?
any suggestions for a tranny?
-
Tyler17rose
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: max power questions
If you are getting custom axels made, go track down a LSD.
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
-
dennisvs
- Regular Member
- Posts: 111
- Joined: January 6th, 2003, 2:01 am
- Location: The Netherlands
- Contact:
Re: max power questions
How much will it keep?
-
Zoso124
- Forum Moderator
- Posts: 1100
- Joined: November 7th, 2000, 2:01 am
- antispam: No
- Location: Sterling, VA
Re: max power questions
constant pounding at around 250 will snap them.
Mike Evans
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
-
dennisvs
- Regular Member
- Posts: 111
- Joined: January 6th, 2003, 2:01 am
- Location: The Netherlands
- Contact:
Re: max power questions
That's not enough.
any other tranny's?
any other tranny's?
-
Bri94GS
- Regular Member
- Posts: 1079
- Joined: February 13th, 2001, 2:01 am
- Location: Hartford, CT
- Contact:
Re: max power questions
Which motor do you plan on running 300-350 HP from?
-
dennisvs
- Regular Member
- Posts: 111
- Joined: January 6th, 2003, 2:01 am
- Location: The Netherlands
- Contact:
Re: max power questions
The KL-ZE
-
Zoso124
- Forum Moderator
- Posts: 1100
- Joined: November 7th, 2000, 2:01 am
- antispam: No
- Location: Sterling, VA
Re: max power questions
May I ask what your doing under your hood to achieve the 300/350 mark?
Mike Evans
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
-
2RotorsNaDream
- Supporting Member
- Posts: 1460
- Joined: September 28th, 2001, 2:01 am
- Location: Killa Queenz NYC
- Contact:
Re: max power questions
Id love to know too, then I wouldnt put in my KL-03 next week. 
1993 Mazda RX-7 Touring Edition Innocent Blue Mica- Not stock...1993 Teal MX-3 GS- KLZE and other goodies. RIP
-
dennisvs
- Regular Member
- Posts: 111
- Joined: January 6th, 2003, 2:01 am
- Location: The Netherlands
- Contact:
Re: max power questions
If it's done I all let you know.
Stil looking for an answer for the tranny and axels because I stil don't know how much they can have.
Stil looking for an answer for the tranny and axels because I stil don't know how much they can have.