KL-ZE Clutch
-
- Regular Member
- Posts: 99
- Joined: October 7th, 2002, 2:01 am
- Location: Ridgetown, Ontario, Canada
- Contact:
KL-ZE Clutch
I was wondering what kind of a clutch setup all of the people out there with the KL-ZE are running, i need to buy one and have been leaning mostly twords ACT...
-
- Regular Member
- Posts: 311
- Joined: August 23rd, 2002, 2:01 am
- Location: Kitchener, Ontario Canada
- Contact:
Re: KL-ZE Clutch
clutchmaster or ACT is the way to go<p>go with a stage 2 or 3<p>there are some people running stage 1<p>i have the clutchmaster stage 3 and i love it
NoVa<p>
Re: KL-ZE Clutch
Clutch Master: Stage 3<p>I heard that the MX-6 clutch disk is actually larger in diameter. Anyone back that claim up, it could be better for performance and street
- Buff1110
- Supporting Member
- Posts: 588
- Joined: February 26th, 2001, 2:01 am
- Location: Howell, NJ, USA
Re: KL-ZE Clutch
the mx6 and pgt clutch is larger in diameter by about 10mm i believe. i have a cm3 in my room awaiting the swap in a few months. what made me choose this over the act is the stock pedal feel because my gs is a daily driver so in traffic this would be easier. and after reading peoples experiences with the cm3. its very well liked.
Dan
92 Mx-3 Gs, KLZE Powered!! - SOLD!!!!
02 Tacoma TRD - Daily
93 Honda del Sol - New Project
92 Mx-3 Gs, KLZE Powered!! - SOLD!!!!
02 Tacoma TRD - Daily
93 Honda del Sol - New Project
Re: KL-ZE Clutch
The CM3 is very easy to engage and disengage and the pedal is firm but easy to use. I should've gotten an MX-6 clutch then, I have the MX-3 disk.
- Zoso124
- Forum Moderator
- Posts: 1100
- Joined: November 7th, 2000, 2:01 am
- antispam: No
- Location: Sterling, VA
Re: KL-ZE Clutch
So your saying you have a CM Stage 3 for an MX3 not an MX6???
Mike Evans
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
Re: KL-ZE Clutch
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Zoso124:
So your saying you have a CM Stage 3 for an MX3 not an MX6???<hr></blockquote><p>same thing
just got rr-racing.com they have good deals there
So your saying you have a CM Stage 3 for an MX3 not an MX6???<hr></blockquote><p>same thing
just got rr-racing.com they have good deals there
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
-
- Regular Member
- Posts: 99
- Joined: October 7th, 2002, 2:01 am
- Location: Ridgetown, Ontario, Canada
- Contact:
Re: KL-ZE Clutch
So a clutch masters stage 3 would be the best to go with? i've heard bad things about centerforce...
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: KL-ZE Clutch
http://www.rr-racing.com/bulkbuy.htm<p>Dont get a kevlar clutch. Ive heard by few that they chatter.
-
- Regular Member
- Posts: 99
- Joined: October 7th, 2002, 2:01 am
- Location: Ridgetown, Ontario, Canada
- Contact:
Re: KL-ZE Clutch
Will the mounts that can come in those bulk clutch buys work with mx-3's?<p>[ March 25, 2003: Message edited by: Jon_Carnie ]</p>