MX-3.com

Now my clutch seems to be working just fine. It still pulls strong. While in neutral for some reason it makes a grinding noise and when i slightly step on the clutch it goes away ( like 1/4 of the way down) The grinding noise comes and goes. Does anybody have any idea what this means? btw it's a 199...

Thanks guys! It was actually the rad behind the condenser shooting a spray of coolant straight forward through the condenser so it looked like it was leaking from there. So all is fixed now. The radiator for automatic trans looked a little different but with parts from the old one it fitted the manu...

I'm hoping someone could confirm the previous statement so I could get started with the replacement right that instant.
thank you!

Ok so there could be coolant leaking from there. Is that right?
OR is that absurd? because it's refrigerant and there shouldn't be any coolant in there?
I just have to know
Thanks

Thanks guys!

But now I also notice a sort of smaller radiator in front of a bigger radiator does anyone know what it is cuz now I'm wondering if it may be leaking fron that one.

I was wondering is someone could tell me if a radiator from an Automatic 1993 MX3 1.8L will fit an 1993 1.8L manual transmission Mx3?
Thanks in advance.

Hi I just had my disty replaced and now it seems like sometimes when I start the car one out of every 10 starts it will studder or hesitate but after I shut off the engine and start it again it's fine. could that be due to bas timing?

Sorry I shouldn't have used the terms rought start.What I mean by that it that it is hard to start(3secs crank or so and usually only starts at the second crank.) Not that it idles roughly.It idles just fine once it'n on.

Well the car runs Fine. other that the rough... extremely rough start (no hesitation whatsoever when I drive).At least once a day it will start just right with no CEL on. I reset ECU pulled codes again then all is cleared except for code 29 (no big deal right EGR valve vent) no more code 04 until I ...

Hi all! Well I really don't know what else to do. I got a brand new disty and ignition cables. Now the car starts every time (but will still take about 3 secs before catching and CEL will come on and stay on) but once in a while it will start just fine and no CEL light on. What should I do? What cou...

Thanks a lot guys.
Appreciate the Info I will look into it..

Hi I was wondering if anyone knows if a V6 MX3 and a V6 MX6 have the same distributor or if at least it is compatible? I 'm having issues with my MX3 ignition and replaced the distributor with an MX6's now trouble code 4 is present but at least it starts after a 3 to 5 secs crank. Before it was inst...

Thanks guys I'm now sure it isn't the fuel pump. I will change the fuel filter anyhow because it's been ordered. Now my distributor was changed 2 years ago and do you think it might be the same problem again? Is 2 years or 45,000 kms the average lifespan of a distributor? I called a garage and they ...

Got 321,000 Km's on mine. Got some issues but only recently and I beat the crap out of it too.
I'm in Toronto ON

HI I have a 93 MX3 gs 1.8 v6 with K8 engine.It stalled sometimes before but only occasionally and then recently more often and tonight it wouldn't start at all and got a boost from a friend keps trying( like 20 times)It would crank but not catch. And then is finally started again and two blocks down...