MX-3.com

Hey Guys! Here is an update from Fastbrakes: Did the test fitting today with the 1 piece rotor, making minor changes in the brackets. Looks like this will be the final version: 12.4" 1 piece slotted/drilled rotors Wilwood 4 piston calipers We can make 2 versions, calipers with piston dust boots...

That's for a two piece rotor josh and a bit different of a setup in order to fit a 15" wheel

Good Morning Guys! Please read the following in response to your questions and please dont hesitate if you require clarity or have any more questions. Also, please note that for the guys interested in rockin 15" wheels, the price mentioned is retail and will of course be lower for those in the ...

I forgot to mention that the kit includes pads, braided lines...etc as mentioned before on page one I believe. Oh and shoutout to Wyt, could use a second opinion, will be welding roll cage soon

Good Afternoon ladies and gentlemen! I apologize for the delay in info but the day has finally come for an update. The kit has been successfully put together with a definite price and with a group buy of 5 or more people we are looking at $820.00 for the dust boot type and $750.00 for the non dust b...

I do apologize for the late reply fella's, I have been going back and forth for some time with this guy and I keep getting the same song and dance. I just sent of an email asking for an update and if he was serious or not about supplying for the group buy. Ill see what he says, but in the interim I ...

Good Morning Guys! Im sorry for the late update, its been a busy week.. Over the past week, Fastbrakes has been test fitting and some machined parts are in the process of being made. The rotor will be a 12" most likely and as to which Willwood caliper will be used isnt quite clear yet. The rest...

Just to give you guys an update.. Brian has ordered a front spindle so that he can get to work on this and said he should have some answers by weeks end. As far as cost goes, he is pretty confident with those numbers but it couldnt hurt to get as many people in on this as possible to maybe get the c...

Listen... I thought I would come to the community that ive lurked for years in the hopes to contribute something and work together to try and do something that everyone can appreciate. While I welcome concerns/comments/questions etc from everyone, I dont appreciate your abrasiveness.. You seem quite...

I talked to him about this and he said that he does run into setups like this now and then where the mounting tabs on the spindle are tall and he still utilizes a one piece rotor but it isnt a wilwood. The kits would still come with wilwood calipers :). If you refer to his website and look at the 11...

A guy would have to be running 17's or better to fit this setup

Sorry for the late reply gentlemen, it has been a pretty hectic week. I spoke to Brian at FastBrakes and he offered this response to hopefully answer some of your questions.. Our 1 piece rotor small 4 piston caliper kits typically list for between $675 and $825, depending on the kit. The kits includ...

Im just trying to see how much interest there would be in doing a group buy on some brake kits for our car. I spoke to a guy named Brian (www.fastbrakes.com) and he was very interested in putting together a willwood front kit (calipers, rotors lines etc) and also upgrading the rear rotor size while ...

Good Afternoon Gentlemen/Ladies, I am currently looking for storage for my mx-3 until spring. I have numerous things to work on to get it all ready and road worthy.. If you have or know of someone that has a suitable place for my car to sleep please give me a shout. I would like something close to t...

Im looking for the headlight covers with the circles cut out...Seen em on a few cars but not on any sites.