MX-3.com

Curious if these solenoid valves will work in place of my old ones.. found em at a wrecker off a mx6 with a KL-101 engine.. the bottom numbers at the bottom (2Y05) are different from mine on the ZE, but all the other numbers are the same. Safe to assume nothing special to these as they are 'generic'...

Fuel mixture felt good, smooth acceleration, no soot or fuel smelling exhaust (you know what I mean). MSD window switches can fix/set the VRIS operating range. The ECU is good, I was seeing between 14-19% fuel correction (ZE injectors are 20% bigger than the K8's). I never found a chip but hey you ...

the "hunting" probably is your TPS not adjusted properly. There are directions on the V6 forums on how to adjust the TPS. You'll be doing some fine tuning to idle, distributor timing and TPS adjustment several times to get it down right. Mine used to hunt from 1200-2000 till I adjusted mi...

Curious, what is the brass fittinged line for in the fourth pic? Like where does it go. Vac leaks are a real problem with this engine so go over ever line checking for leaks. The accordion intake hose is prone to cracking, I fixed one using Goop. ECU and KL02 vaf is fine. On the OBD2 you need to us...

Hey all. Just bought a '96 mx3 with a KL31-101 curve neck .. ECU is K853 and using a KL02 VAF. Issue i am finding at the moment is the CEL is doing a static constant blinking, in like 1 sec intervals when car is running. I tore down the throttle body and clean that up, checked the stock boot for the...

Thanks for the info and a heads up! Sounds like I will wash the motor in Calgary, and just find a complete 98+ 626 to rip down and ensure I have everything. Thanks for taking the time to type this info out for me with the pitfalls, and yes, I will document my progress as I attempt this. Reading a wi...

Hi community! Not sure if this question is in the appropriate section, however, I own a no rust, near mint 1996 MX-3, and knowing that the car is ODB ii, I am curious what would need to be done to swap a KLG4 from a 2002 626 into my car.. I did look around the forums, but mainly found people doing a...