MX-3.com

http://cdn2.autopartsnetwork.com/images/catalog/brand/moog/640/K8995_TOP.jpg Kay, that's the upper seat. The part where the strut bearing goes in is not parallel with the strut rod, it's on a downwards angle. So trying to put in the strut bearing into the mount AND onto the strut rod just ends with...

So, here's the struts I'm trying to put together: -ZX2 mount and bearing -Escort struts -B&G MX-3 Springs The problem I'm having is that the top hat where the bearing sits is not level with the strut rod. So when I try fitting the bearing then the mount, it either sits in the top hat but not the...

I saw some 2005 MX-5 Sports Suspension rear calipers for $60 each on eBay a week ago, dunno if they're still up. Don't bother with Partsource/Canadian Tire or NAPA, it'll be an arm and a leg and maybe a gnad. Rockauto has the Miata rears for $100, with a $37 core included. Umm, has anyone checked ou...

DE swap is most likely for me, found one for $100 local, but as is I don't have the time to do an engine swap, nor would I like to invest significant money into the K8. Going to run the K8 until it dies, but would like not to replace oil all the time. Already won a set of Colt N/A cams on eBay for $...

I will do a compression test sometime, but there is no blue smoke from burning oil. Owners manual states 0W30 for best performance, 10W30 for normal. A 0W40 isn't going to ruin anything. These aren't F1 engines :P. It doesn't seem to be the oil. I've run a few types, different weights, and same thin...

Brief overview: -247k km -Mobil1 0W40 + Mobil1 filter -Previously used Castrol Syntec 5W50 + Mobil1 filter -Changed oil approximately 2000km ago, about 3 weeks ago After two trips to and from Toronto and Barrie, I noticed HLA tick. Normally my engine does that for a second when I start the car only,...

Not needed anymore. Got one with hell of a lot of rust and some holes for free.

Looking to get a complete exhaust from the headers all the way back to muffler. Will be building an exhaust, so I need a template to work from. I don't care how many leaks or repairs it has, or even if there's an entire chunk of pipe dented or rusted out. As long as it is one entire piece, I am happ...

ZX2 struts are a great cheep alternative to buying new OE struts, but they are still Tokico's. The GR2s are the way better option. KYB GR2's are a great choice GR2's are OEM replacements, ie. stock. Tokico Blue is a stock replacement that handles better, that's basically it. Lower it, and it become...

This it? It has a part number on the back EA17. I'll trade it for Rockstar (2x original, and 2x cola plz).

Would like to say: FUEL Throwing in a bit of injector cleaner into the tank, and it started running perfectly. No hesitation at all. Started coming back as I refilled the tank. Replaced injectors with known good ones, zero problems. Sounds like its getting more narrowed down.... Filling up at the s...

Would like to say: FUEL

Throwing in a bit of injector cleaner into the tank, and it started running perfectly. No hesitation at all. Started coming back as I refilled the tank.
Replaced injectors with known good ones, zero problems.

I'll have the original springs available when I do strut mounts. Sometime this week. I'm in Scarborough BTW.

Damn, I scrapped a car with the ECU and VAF. Oh well.

Kay, it's NOT a vacuum leak. Using both smoke and propane (the PROPER way, not WD-40 or carb/brake cleaner). And this only occurs when fully warmed up. Dead cold, not a single problem, warming up, not a single problem. Warmed and running for 5-10 minutes, hesitation. I will be changing out the O2 se...