MX-3.com

Thanx heaps Ryan and ninja,your tips where spot on,I filled the sucker up and no more brake light.cheers boyz

Hey boys got a weird one for yous,I own a 1992 mazda mx3 with a KL 2.5 Klde.The strange thing is that sometimes when im accelarating hard and in high revs,The little brake Warning light comes on.The light im talking about is the one on the speedo cluster that usually tells you your brake light glubs...

Wot ecu airflow meter would you use on a Mazda mx3 0b1 running a japspec 2001 klde with a longneck.Running a Kl31 ang je50 running rich at the moment.Haven a late model engine like myn witch is a 0b2 and me running 0b1 harness have any affect on mapping power etc.And is there any chips out there for...

Thanx Nd4spdse for your help,Ill try swap the o2 sensors in the next couple of weeks and check the coolant temp sensor to.I have two je50 and try'ed them booth so its not the vaf.Just one thing Nd4spde wot o2 sensors should i buy,mazda mx3 k8 or o2's used in a mx6 626 etc..

Hey boys im back its been a while,Quick info-1992 Mazda mx3-japspec build 2000 KLDE cast number 814...101 heads KL31 longeck manifold updating that i sourced a KL31 ecu from ebay.And have been running a KL31 ecu GE50 combo for a while now and found the fuel econemy and power poor runs rich.Thu wot i...

Hey folks,Got a bit of a problem with my mazda running a little rich.Its a 92 mazda mx3 klde block number 815*** running a kl31 ecu,je50,and a jap spec long neck manifold and always use 98 octane fuel.Ive changed the plugs and leads,fuel filter etc.The thing is the car runs smooth no smoke coming ou...

Hey boyz,Ive got a mazda mx3 with a late model KLZE long neck running a jap spec KL31 ecu and JE50 vaf.The car was going strong when i swapped over the ecu from K8 to a KL31.My mate asked me to try using the KL02 i had sitting round.Soon as i put the KL02 vaf it ran like crap as i told him it would....

Hey boys,just a quick question,ive been looking on ebay to buy same headers for my mazda mx3 longneck klde.The thing is ive seen a couple of bolt on turbo kits to suit either a KLDE or a KLZE for round 1000 bucks.The thing is have any of you guys used one of this aftermarket turbo kits.I need all th...

Thanx ryan,Yeah i had it made 98 kw at the wheels,so i wouldent get much more than 2 kw at most doin the cold air intake.One more thing how many kw you can get out of a KLDE and wots the most anyones seen a KLDE make.All ive done is a xforce cannon and k@n pod filter,KL31 ecu and longneck manifold.A...

Hey boyz.Got a mx3 klde longneck.Need your help guys,Im trying to figure out the best way of going about fitting a cold air induction on my mazda.At the moment i got a k@n pod air filter hooked up like most mx3 KLZE/DE,just hooked up to the rubber pipe intake.Wots the best way about goin about doin ...

Hey boyz thanx for all the help you gave me :) .Got the pic uploaded on cardomain finely. http://www.cardomain.com/ride/3891493 .I would love to know what KL i got in my mx3 for once.Same facts..Head codes KL101,longneck,running good on KL31 ecu and JE50.tryed using a KL02 vaf and australian spec mx...

Hey MRMAZDA92 how you going mate,you should know living in australia how hard it is to get a KLZE let alone get sameone that tunes and works on them.All thats done on the moter is a pod air filter and xforce cannon.Got a pic of my moter just dont know how to add it on the furom.Thanx for the help bo...

yeh man,Since i swapped the k8 to the kl31,the idle is much better.When i used to start the car with the K8 ecu it would rev to 1800 rpm and take a about 3 mins for the revs to drop down to 800rpm.As for the richness KL31 ecu is bettar on economy not as much as i thought it would be but better.The o...

Sorry about the late reply boys my laptop crashed,,Yeah its a bit complicated.I told the mechanic i wanted a japspec 2.5 in my mx3 since the k8 gave up the ghoost.But since i stuffed up bad and didnt reserch the diff's in KL engines.At the end of day when the conversion was done.What i ended up with...

I know its been posted agian and agian,But i wonna get the clear from you boys before i go ahead.I got a late KLDE longneck KL31 ecu JE50 in my mx3.Got anouther mx3 with a KLZE but with a blown head gasket,Thinking of putting the KL31 cames in the KLDE.Wots the power gains if any and if its worth th...