MX-3.com

well i wouldnt run them on my car and there not on mine there on the gyus car that lives by me. there are no screews that hold them on i got the orings and have not put them on yet but the spring purch is in the way from making them sit right.

so a guy that lives by me that has an mx3 just like mine bought kyb struts cuz i have them and went cheap and bouth adj. coilovers. the cheap ebay ones. i told him i would help him put them on but i started to look at them and do you have to cut the spring perch that are on the kyb struts to put the...

so i have been driving my 93 with the klde swap for a while and still having a little problem with it. i have the klde inlet tube on the motor and it only has the water temp sending unit. and one of the water temp sensors that tells the ecm how hot or cold it is. not haveing bouth temp sensors hooke...

on a 93 it is the center one on the 3 pin

so how can i get that other water temp sensor to work or fake it cuz i dont want to tear the motor apart to put the other neck on

so could it be running rich becuz i am only using one temp sensor. i have a klde in it and didnt feel like changing the neck for both sensors

ya. in limp mode. wont a knock sensor put it in limp mode

ok. well dosnt that knocksensor code make the car run in loop mode so it runs ritch

i have one just kicking it around the house. if i think about it later i might go rip it apart and look in it

there seems like there has to be an easyer way of testing it. i mean alll that work putting it in and it not work

i could not get my de intake to fit in my mx3 with the motor so i put the k8 intake on. can i put the de tb on the k8 intake

are the knock sensors the same on the k8 and the klde and how do you test them

so i am getting a cel on my car thay i just put the klde moter in. its for the egr. can i take the one off the k8 and it work. and y dose auto zone have 2 diffent part numbers for that pice on diffent cars

i checked the time a lil bit ago and it was at about 11. ill go to a junk yard tomorrow and see if thay have a vaf cuz i dont have the money to buy a new one. or is there a way to test them

so should the 2nd virs open when the car is running and the 1st one never opens. i have tryed a vacum tester on them and thay will both open and close