MX-3.com

hi all i was working on my car and it was running. it whas in neutral and i reved a few times and it suddently dies i have a spark but my fuel is cut of injectors are not firing. checked the fuel pump ( f/p grnd) i have fuel pressure checked camshaftsensor. swaped the ignition swapped ecu(k8) still ...

hei is ok
fuel pump also and the conectors
i get no error codes
but my ecu is in warning program



greetings

is there a way to test the hei?

i checked the fuel pressure with the diagnosis box and its ok o hear it running

the wires are good conected. i have changed my ecu but didnt solve the problem. disty is on time and the start motor turns auround i have 2 times earth on the disty and 2 times 5v the other conector is conected to the hei modulle the hei haves 2 12v and 2 earth on the 4 wires on the coil i have 2 ti...

hi all, i have the following problem i have changed my ze disty o seal becouse its whas leaking i didnt need to disconect any plugs i changed it turned my disty back on and i have no spark or injection :( the disty is on time no fuses are blown i have a hei and a extenal coil i have 2 x 12v on by co...

is the 1k ohm resistor a must??

greetings kevin

I now what he means the yellow cable on 1 or on 4 orange cable on 2 or on 3 red/black cable on 3 or on 2 black/red cable on 4 or on 1 becouse a few post above they say mount it backwords?? how must he connect the plug in wich order? greetings kevin