MX-3.com

Long story short i bought a 94 to replace my 92 klze(car not engine) and something is in the gas tank. Long story short, it doesnt start and i think i cooked everything fuel related including my injectors.
Question: Where can i get me some high flow injectors\fuel rail, fuel pump, (also lines, tank ...

OK so i have a 92 to 94 bodystyale ZE swap. Engine was running before swap WITH all the engine codes in the book, and i was still smoking integras. ƒixed everycode in the book, finaled the swap and now NO start. i got it running for 5 minutes, it died. replaced the dead fuel pump, now no start. Have ...

I just read that big post and realised you fixed your not start, what are you running a 2.4???? arent they 2.5 ze? anyways check your tp sensor, there usually pretty touchy, and for my problem i have 3 disty, 3 ECU, 3tp and 3 VAF all 1.8 and no0thing starts the car check the other post if you can ...

So i swapped out my comp it removed the MAF and TEMP codes, but i got a 5, and a 9 now. thermosensor and knock. not so woried about the knock sensor ... yet ... anyways is there a common link between the injectors not pulsing and the distributor not giving spark??? i notice with my TP problem it ...

Let me know when you figure it out :) i think im in the same boat as you. im trying to figure out if theres a common problem between injectors not firing and no spark. I also have a no start after a 92-94 ZE swap-in, the car was running before hand.(mind you lots of problems and codes but still ...

So, heres the story:

I bought a 94 and swapped my ZE from my 92, pretty sure i did everyhting like i was suposed to. (wiring wise) i have 2 wires without homes by the throttle body and im missing the IAT plug on the other side.
Heres the real brain scrather: when i 10 gnd diagnostics the car to ...

hey man, i just seen this was an old post, but did you ever figure out this problem and do you still have dash lights? cause i have that problem now, they are dimmer swithc wires i know that, but how do i plug them in so i keep my dash lights?

i dont know if your question was answered but you probably inversed the dimmer wires behind your radio, (im currently in the middle of fixing this properly on my 94, it was not a apparent problem on my 92) the red and red stripped wires behind the radio. the power is blue & red stripe, the accessory ...

Hey, i bought a 94 mx-3 to replace my 92, i swapped out the enigne and all the yaddy yadda, i got to the stock radio, cut the harness pluged it all in, long story short, now i have no dash lights and 2 wires left over. red and red stripe. behind my dimmer switch are the same color wires. can anybody ...

can you do me a favor and send me a couple picture from around the throttle body area, im having vacuum problems and any help is appreciated. pretty much just to know where everything goes and comes from. thanks

a little base note, the ZE was running fine when i got it, then it started reving a little for a couple months (like 2000-2500) parked it for 6 months (and past 6 winters) because i had a work truck to use. when i returned to school for welding (2 year course started in sept) and had to return the ...

so i was sitting at a light for 15 seconds about (usually i turn it off but i just let it this time) and it was revving at about 4500. i press the gas change gear and poof all of a sudden it's dropping back to 2500 wich is music to my ears. regardless i would like to completely exchange the part ...

well. it seems to have made an effect but is still back at square one, i think i should exchange the part all together.

what car do i get a new one

UPDATE!!

So i got the TB off (thanks davmac for the brain fart) and used about 3 caps of varsol, let it sit for about an hour shook it around and swooshed my finger to try and clen the part and the rusted spring stared to move. i threw it all together and started the car (placing the tp back at ...

LONG STORY SHORT, i think its the IAC. just bickering underneath
DAVMAC - thanks for the input but im just gona put the TP about where it was when i finally find the problem. and thanks for the tip i had forgotten i could do that :)

Ive had 3 people look at it and 2 of them being old school type or ...