Search found 911 matches

by RX8SE3P
January 14th, 2009, 3:06 pm
Forum: V6 Technical/Performance
Topic: HEI Mod problem.....won't run?
Replies: 20
Views: 2963

Re: HEI Mod problem.....won't run?

I'm only really using the HEI by itself, no external coil etc. I do however have a ZE disty and the correct 4 pin plug for it. So I could give it a shot one day. For now though, I only want to run the HEI by itself as the orange wire to the 6 pin plug broke right off a the bottom of the plug. On my ...
by RX8SE3P
January 14th, 2009, 2:24 am
Forum: V6 Technical/Performance
Topic: HEI Mod problem.....won't run?
Replies: 20
Views: 2963

Re: HEI Mod problem.....won't run?

nd4spdse - So the blue and red wire on the 3 pin connector are NOT cut? They still go to the plug and you are merely adding the red and blue wires to them, which go to the HEI?

My HEI mod STILL does not work and it's giving me the poops!
by RX8SE3P
January 14th, 2009, 1:35 am
Forum: V6 Technical/Performance
Topic: Finally, WOT!
Replies: 6
Views: 133

Re: Finally, WOT!

Modded 240SX? I hope he has turbo lol otherwise there's no reason for him to be even remotely close to your car.

Good to hear you got the WOT now though. Get another 1/4 time! You fixed your slipping clutch yet?
by RX8SE3P
January 14th, 2009, 1:33 am
Forum: V6 Technical/Performance
Topic: HEI trouble 1995 mx3 OBDI
Replies: 1
Views: 80

Re: HEI trouble 1995 mx3 OBDI

bump
by RX8SE3P
January 13th, 2009, 6:15 am
Forum: V6 Technical/Performance
Topic: HEI trouble 1995 mx3 OBDI
Replies: 1
Views: 80

HEI trouble 1995 mx3 OBDI

Yes it's me again.... I was looking at my disty today and the orange wire on the 6 wire plug was very frayed, I thought, damn that might break at any time. I tugged lightly on it to test strength. It broke right at the end of the plug!!!! Tried to start to see what would happen, it cranks over but n...
by RX8SE3P
January 13th, 2009, 1:55 am
Forum: V6 Technical/Performance
Topic: How To: KLZE Distributor installed on K8
Replies: 13
Views: 7432

Re: How To: KLZE Distributor installed on K8

Nice stuff.

My ZE actually came with it's own disty. I have a HEI module so I guess all I need now is some MSD coil thing like you right?

I have a 1995 OBDI MX3. Do you think this will be difficult to setup?
by RX8SE3P
January 13th, 2009, 12:40 am
Forum: V6 Technical/Performance
Topic: Timing and ZE also blowing smoke
Replies: 7
Views: 88

Re: Timing and ZE also blowing smoke

I hope it is fuel hehe. I am getting decent economy though. But I do drive at times with hardly any traffic and the need to stop. I'm gonna try and borrow a friends disty and see how it goes. A power increase and no more white smoke would be a dream come true lol. It can very be white and gas Let's ...
by RX8SE3P
January 13th, 2009, 12:38 am
Forum: V6 Technical/Performance
Topic: KLZE Fuel economy questions
Replies: 45
Views: 2430

Re: KLZE Fuel economy questions

Hang on, I was wondering, if high rpms are just as efficient, N4SPDSE, how come people don't drive around town in second or third gear all the time? Also if this is true, then my economy should increase during my city driving if I use 4th instead of 5th right? I might see what economy I get off this...
by RX8SE3P
January 12th, 2009, 3:04 pm
Forum: V6 Technical/Performance
Topic: Timing and ZE also blowing smoke
Replies: 7
Views: 88

Re: Timing and ZE also blowing smoke

It does smell quite rich. I was told white smoke can't be fuel. I hope it is though.
by RX8SE3P
January 12th, 2009, 3:17 am
Forum: V6 Technical/Performance
Topic: KLZE Fuel economy questions
Replies: 45
Views: 2430

Re: KLZE Fuel economy questions

I totally agree but once you go too fast, the wind resistance becomes a major factor also, the more resistance, the more the engine has to work. The higher the RPMS the faster you are likely to be going too. Faster you go, the more resistance you get. If there was zero wind resistance, like you said...
by RX8SE3P
January 12th, 2009, 2:03 am
Forum: V6 Technical/Performance
Topic: Timing and ZE also blowing smoke
Replies: 7
Views: 88

Timing and ZE also blowing smoke

So my ZE is blowing smoke much to my horror. I didn't really realize until a couple weeks ago. It hasn't stopped doing it either. When I take off it does it most. It's white. I have lost no coolant and I don't think I have lost much oil but might have lost a bit. Not entirely sure. You'd think it wo...
by RX8SE3P
January 12th, 2009, 1:08 am
Forum: V6 Technical/Performance
Topic: KLZE Fuel economy questions
Replies: 45
Views: 2430

Re: KLZE Fuel economy questions

When would your fuel economy be better? When driving with vris1 and 2 open or closed? Well they open @ 4000+ RPMS on a proper ZE ECU. I wouldn't expect good economy at 4000+ RPMs lol Best fuel economy is probably 45-50MPH - 80kmph on a flat road. The engine has enough torque there and not much wind...
by RX8SE3P
January 12th, 2009, 12:57 am
Forum: V6 Technical/Performance
Topic: coolant pot question, by the disty.
Replies: 6
Views: 256

Re: coolant pot question, by the disty.

Telling us what kind of engine you put in would help a little. Then I could check my own engine if it's the same.
by RX8SE3P
January 12th, 2009, 12:55 am
Forum: V6 Technical/Performance
Topic: Replaced air filter, now won't start
Replies: 12
Views: 473

Re: Replaced air filter, now won't start

I've already thought of the vaf being unplugged or any of the surrounding cables but they weren't. The filter was the same placed in the same position and not overtight, but good call anyway. But my battery was very dead, and while dying made my alarm go crazy (in silence) and that killed whatever ...
by RX8SE3P
January 9th, 2009, 9:08 pm
Forum: V6 Technical/Performance
Topic: gasket kit off ebay
Replies: 18
Views: 342

Re: gasket kit off ebay

I must live in bizzaro land. Since when was anything from mazda cheap? Would I actually have change for $500 AUD if I got head gaskets, VC gaskets, TB gaskets, all the little seals and whatnot etc? Last time I checked too, they wanted over 200 for a water pump that I get off ebay for like under 100....

Go to advanced search