Search found 3745 matches

by SuperK
December 13th, 2016, 7:46 pm
Forum: General Mazda MX-3
Topic: 1995 MX-3 1.6 DOHC Water Pump Replacement
Replies: 5
Views: 3277

Re: 1995 MX-3 1.6 DOHC Water Pump Replacement

in the B6 DOHC the valve cover is also part of the timing belt cover.
by SuperK
December 2nd, 2016, 11:23 am
Forum: V6 Technical/Performance
Topic: Stumped...
Replies: 3
Views: 2740

Re: Stumped...

2nd gen mitsu eclipses used to shut off randomly on the interstate because of a defective ECU.
by SuperK
October 23rd, 2016, 6:16 pm
Forum: V6 Technical/Performance
Topic: 94 gs with a 93 DE belching black smoke but runs ok
Replies: 4
Views: 3509

Re: 94 gs with a 93 DE belching black smoke but runs ok

if you are dripping fuel from the tailpipe, then you have a bad injector/bad injector seal. an o ring kit is pretty cheap, make sure to oil up the seals when reinstalling.
by SuperK
October 11th, 2015, 9:08 am
Forum: V6 Technical/Performance
Topic: HELP - Vacum KLDE engine
Replies: 2
Views: 3289

Re: HELP - Vacum KLDE engine

I can't see the link
by SuperK
September 11th, 2015, 10:31 pm
Forum: MX-3 Related Want to Buy Forum
Topic: [WTB] leather seats
Replies: 1
Views: 2778

Re: [WTB] leather seats

200 for rear leather SE seat, upper and lower
500 for the front leather SE seats.
All in excellent condition with no rips or tears.

Not including shipping
by SuperK
September 11th, 2015, 10:28 pm
Forum: Appearance
Topic: Installing Chrome Miata Handles
Replies: 62
Views: 24124

Re: Installing Chrome Miata Handles

I have an extra set I can sell. 35 shipped in the US if you're interested.
by SuperK
June 12th, 2015, 8:25 am
Forum: V6 Technical/Performance
Topic: klze not running well.. sputtering and popping under throttl
Replies: 12
Views: 7319

Re: klze not running well.. sputtering and popping under thr

do you have a VAF you can swap out? It could be a bad VAF.
by SuperK
March 16th, 2015, 10:51 am
Forum: Electrical & Lighting
Topic: Seat belts will not move
Replies: 7
Views: 4464

Re: Seat belts will not move

I don't know of any other manual belts other than the mx-3 that will fit.

But the cable and motor assembly is one unit. The whole unit will need to be replaced.
by SuperK
March 15th, 2015, 7:39 pm
Forum: MX-3 Related Want to Buy Forum
Topic: [WTB] reverse switch
Replies: 1
Views: 2659

Re: [WTB] reverse switch

buy a new one. Used ones are just a leg away from falling apart anyways.
by SuperK
March 14th, 2015, 4:47 pm
Forum: MX-3 Worklogs
Topic: SuperK's '92 MX-3 GS "Clanky" (ukrman's car)
Replies: 23
Views: 12012

Re: SuperK's '92 MX-3 GS "Clanky" (ukrman's car)

When I said, "I've sold Clanky" What I meant is, "Someone else is driving it but I'm still fixing it." http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/MX-3/IMG_0136_zpsddbl916s.jpg So no good SuperK story is worth telling without a bit of misfortune. I have a very long li...
by SuperK
March 7th, 2015, 7:28 pm
Forum: V6 Technical/Performance
Topic: CANT FIND WHERE KNOCK SENSOR PLUGS INTO HARNESS
Replies: 10
Views: 5443

Re: CANT FIND WHERE KNOCK SENSOR PLUGS INTO HARNESS

why the heck would... sigh.... nevermind I shouldn't ask.

NO I should ask. Why would someone cut the wires off...
by SuperK
March 7th, 2015, 5:01 pm
Forum: Electrical & Lighting
Topic: Seat belts will not move
Replies: 7
Views: 4464

Re: Seat belts will not move

both sides or just the one? something with the motor and the cabling isn't working right. some really really fat guy once sat in my mx-3 and the belt didn't make it over him. Something snapped and it does exactly what you say it does. The whole assembly had to be replaced. I have a good working driv...
by SuperK
March 7th, 2015, 4:13 pm
Forum: V6 Technical/Performance
Topic: CANT FIND WHERE KNOCK SENSOR PLUGS INTO HARNESS
Replies: 10
Views: 5443

Re: CANT FIND WHERE KNOCK SENSOR PLUGS INTO HARNESS

If that was the only thing wrong with this engine... This sucker's dead, jim. er, dan
by SuperK
March 5th, 2015, 6:11 pm
Forum: V6 Technical/Performance
Topic: CANT FIND WHERE KNOCK SENSOR PLUGS INTO HARNESS
Replies: 10
Views: 5443

Re: CANT FIND WHERE KNOCK SENSOR PLUGS INTO HARNESS

Image

Verified on a 92 GS and a 94 GS. I have both of them and just looked.
by SuperK
March 5th, 2015, 6:04 pm
Forum: V6 Technical/Performance
Topic: CANT FIND WHERE KNOCK SENSOR PLUGS INTO HARNESS
Replies: 10
Views: 5443

Re: CANT FIND WHERE KNOCK SENSOR PLUGS INTO HARNESS

brb. better appreciate this. it's cold outside.

Go to advanced search