MX-3.com

i am trying to find the coolant temp sensor on a 92 1.6l sohc to no avail. i might be completly BLIND it wouldnt be the first time. trh online manuel only shows the dohc. any help would be greatly appreciated.

I am having the same problem and ordering my bushings from SRD this week. also check the 3rd Bushing on SRD's website cause i looked at mine and it is completly Gone and mazda says you have to replace the WHOLE control arm to take care of that bushing. to you mazda LOL

in the online shop manul there is a guide to pulling codes. you can use a small wire and connect GRD and 10. You will be looking for a small box on the driver side up towards the windshield. after putting the wire in place turn key to on position and count the flashes. Tunes can prob help you more o...

Is there any difference in the product from nope to krazy or are they both getting it from the same place? Also has any one used one of the flex fiber kits yet i would love toi heasr about some hands on results with this product.

im ordering my bushings tomorrw so ill let you know. but i did get under and hand check all of them and it looks like they will pop right out.

Thanks Tunes

im going to order everything on monday. so would you say that SRD bushings would be my best bet or would you recommend a better place.

i do plan on going with a short shifter. But let me tel you this RATTLING HAS GOT TO STOP IT IS SO ANNOYING

well im planning on getting the kmax kit and was wanting something that could atleast take a little bit of a impact without cracking. i mean i know that the paint paint would crack but if the kit could withstand some impact that would be great. ALSO wondering about the fitment of the KMAX kit from k...

ok i found that srd has a 3rd shifter bushing. has anyone used this? also are they the best place to get Bushings?

I have read about anew product called flex fiber and wondering if anyone has used this, or had any comments about it.

i had alot of play in my shifter so i looked under the car and found almost all my bushings where shot. so my question is is it worth spending more for the bronzoil bushings.? also on the control arm up by the motor there is a bushing thatn looks like it can not be replaced, is ther a way to replace...

Use The Search function ther is pleanty of info on doing this swap. I also plan on doing this when the $$$ is right have fun and good luck

ok so i read the thread that kingfd started about his idle problem and it seems that everyone is having this problem so iam am going to try the coolant temp sensor and see if that solves my problem. wish me luck

Ok so i tryed to pull codes from the CEL but i didnt get any. then looked closely at the intake tubing and found it was not tight. After tightening it started to run alot better however when it is warmed up it still goes from about 1000-500 RPMs i checked to see if there where and vacum leaks any wh...