MX-3.com

still interested in the master cylinder. I am off wed and thurs this week maybe we can meet up and I will look at some other parts.

Jason

what do you want for the brake master cylinder.

Also just curious how much for the wheels and the spoiler..

Jason

Dallas, sounds like you have a leak, check the calipers out and see if one is leaking. If you have already replaced the master cylinder, did you get a new on or a JY one. if it was a jy one it may not be good anymore try a new one, they are only about $40 If the calipers are leaking you can rebuild ...

I am asking 2000 for it. Depending on what is being offered I may take less. Car is mostly stock, 93 SOHC, it could use a distributor it has a bad cam position sensor. Also the master cylinder may be done. going to bleed the brakes and replace the fluid to make sure it isn't and air bubble in the li...

looking for a distributor off of a 93 SOHC, also may want to pickup everything for a rear disc swap if i keep my car. any ideas if you have these and what prices do you think.

Jason

i have been on this site for a couple years and have only found all you cincy guys in the last couple weeks. As far as a gs, there was one posted on CL in Lawrenceburg a couple weeks back that had a bad distributor. I think she was only asking $500 for it. Also there was one listed in Louisville if ...

Any one have a distributor for a B6 SOHC laying around that they would part with. Let me know.

Jason

ok, i am headed to the JY on Monday to pick up some parts. I hope to find a V6 with a master cylinder, booster, and rear hubs to be able to swap the back from drum to disc. Is there anything else that I will need or will this list do it. I was planning on picking up the rear calipers and rebuilding ...

300zx: if I hold the brake after pumping it does not sink back to the floor, it stays stiff

ok, first off, thank you for all the replies, they are all much appreciated. checking the fluid, it is full. there is no leak at the front calipers, pulled the back wheels and no leak is visable, I did not remove the drums. the reason that I originally suspected the booster was to me if it were a le...

I rebuilt the front calipers on my car with a $3 kit from autozone. Use an air compressor into where the brake line connects to remove the piston, as long as the bore and piston are good you should be able to just replace all of the seals and put it back together. and be good, I just took a good bra...

Okay here is the story, I was driving to work last Tuesday, about 20 miles on the highway, when I got the exit ramp and hit the brakes the pedal hit the floor. As I was downshifting and pumping the brakes on the fourth pump I got back to "normal" pedal feel. I figured that it was a vacuum ...

Had to let you guys know about this one. on my way back to work from lunch my temp gauge started to climb pretty high. figured it was my thermostat that I was planning on replacing anyway (new one already in the garage just need time to install) so I shrugged it off, after all it was 97 degrees toda...

I have had the pacesetter monza big bore on my 93 sohc for about 5 years now. when I got mine there were two diferent versions. mine is the 2.25" and I haven't hd issues with it. it may be overkill but I was planning a BP swap. now I am thinking of a turbo for the sohc. s long s the mounts re r...

maybe try the 90 amp alternator from the v6. when I upgraded mine it seemed to help some with the overload.

jason