MX-3.com

Didn't get a CEL until yesterday afternoon. It was almost 90 degrees yesterday so I an thinking that is when the cap warped. I am thinking that with the hotter than normal temp and some extra driving I did the engine was a little warmer than normal. Any thing that I need to be aware of when pulling ...

Well today the civvvvv, civvvvv....... (better not mention the c word) My other car decided to stall out on me twice, check engine light came on and decided what had been a random occurence would be full time. I got it in the garage tonight, the mx3 is finally out for a few days, and started checkin...

No CEL Plugs are brand new, wires new last fall. new ignition coil as of last fall, new ignition control module as of last fall.

98 lx with 4cyl. Completely stock except the muffler is missing, don't feel like spending the money to replace it....

All good options... If anyone has one they wish to donate to the cause it would be appreciated...... Now on a serious note, let's imagine this issue were on a mazda, what would you suspect the culprit to be. Or pm me and I will give you the address to drop a new daily driver off at....

Yes did, but it is too hard to put a car seat in the mx3...

Just curious, my daily driver civic is having issues. When it is cold it sputters a little bit while giving it gas and the idle drops to about 300 rpm. Once it is warmed up she runs just fine. I was thinking fuel pump but being warm wouldn't affect that it as far as I know. Any ideas??

I wouldn't worry about the plug if I were you. It is supposed to go into the transmission in place of the axle shaft to keep you from losing all of your gear oil. It also holds all of the spider gears in place. I just get the new axles before removing the old ones and pull the old and put the new ri...

Also to check the tires rotate them and see if it still pulls right or starts pulling left

Why are you taking the axle nut of to take the rotors off you should be able to pull them without taking the axle nut off. Once the caliper is off you should be able to pull them off. If they are stuck there is a threaded hole you can screw a bolt into to pop them free. Or a hammer with light taps a...

How much for shipping on the plugs, wires, tail lights and Radio to 45238 if it is all still available. also did the radio function properly/display work when you removed it.

if the turbo is still available how much to 45238.

Throwing it out there becauit happened to me. Check the tube from the maf to the intake manifold if there is a crack it will cause a bad read and idle issues. Also did you try to take off the maf if so did you remove the screws. If so check the connections it controls the fuel and spark. Just a thou...

is there a time this weekend we can meet up for me to get some parts. PM me your address if you would.

Thanks,
Jason

Figures' I usually work all day saturday and until about 6pm on sundays, joys of retail. What are the chances of coming over sunday evening about 7. Definitly want the master cylinder. May look at body panels, wheels, spoiler/hatch, fenders, and both bumpers. What are you thinking of for prices. I a...