MX-3.com

On my rs, stock suspension with 15" honey combs, and 195/60 15's it is 25 1/2 inches in the front, and 25 3/8 in the rear, from the center of the hub to the lip is 14 1/4 front and 14 1/2 in the rear, wheel and tire size should not affect that.

Hope this helps

If deepblue doesn't like the shipping price to brazil let me know what it would be to ship to 45238...


Thanks

did you try to remove the connector for the maf, if so most likely you pulled apart the internals. There are connections in there for the fuel pump as well as the ignition system. if they are broken then you will not get fuel or spark. Happened to me when I replaced my transmission. didn't pay atten...

I agree ryan I would never buy it anyway, but too much fun not to pass along. Super k, missed the non airbags. Good catch.

http://dayton.craigslist.org/cto/2599485743.html


Took the time to read the entire thing then looked at the pics. If you are going to post random pics, make sure the wheels match. And if the pix says a car lot in newark nj, and you are in dayton ohio it is a dead give away.

great video....

the reason that the idle is high when it first starts it to get it up to operating temp quicker. this is normal. If it continues to do this longer than a few minutes then it may be worth looking at. But at 1600 rpm you are definitely high. like everyone else said, 600 to 900 rpm, i usually set mine ...

not available for drum brakes on the mx3, guess I need to do the rear disc swap....

the sad thing is that I so want to get my suspension but right now that is just too much for what I can spend. otherwise i would put this thread out of its mind and take them off of your hands...


Jason

285 hp KLZE n/a with a body kit and primer paint job, blown valve in the engine, as he put it runs will just on 5 cylinders.... put some square headlight on it looked really wierd.

i think he is selling his car..........

http://dayton.craigslist.org/cto/2506797686.html

probably not him but the same story.

Jason

:lol: :lol: Yeah...I was planning to get 3 or 4, you know...just in case I don't like the color or something... :shrug: :lol: I'm less picky, I'll take the 3 sets you like the least :lol: I'll take one of the ones you don't like. This could work out nicely. I will install mine first so you guys can...

For a difference of 5 bucks I'll probably take both. What is your papal and I will send it this week

screw out, new cap and rotor on, ended up having just enough room in the engine compartment to get my small drill in and use a standard extractor to pull the broken screw out. Took it for a short test drive and the idle was still a little low but it was not bogging down or running all in all like cr...

Might be interested in the hatch covers, how much shipped to 45238, and I would only need one, need a template to make my own from...